The PLENTY Liquid Pad Set is a pair of stainless steel mesh discs designed to hold waxes, oils, and concentrates inside the filling chamber of the Storz & Bickel PLENTY vaporiser. Without a pad, concentrates melt straight through the chamber screen and gum up the cooling coil — these keep the mess contained where the heat can actually do its job.
Why you need the PLENTY Liquid Pad
If you've tried to vape a concentrate in a stock PLENTY chamber, you already know the problem: wax liquefies at around 60°C, drips through the standard screen, and ends up coating the inside of the cooling coil. That's a teardown and a deep clean you didn't sign up for. The liquid pad is a stainless steel mesh disc that sits inside the chamber and soaks up the concentrate like a wick — the oil stays on the pad, the vapour comes off clean, and the rest of your vaporiser stays spotless.
This is the official Storz & Bickel accessory made specifically for the PLENTY's Filling Chamber Reducer. It's not a generic aftermarket part — the diameter is cut to match the reducer exactly, so there's no fiddling with folded screens or DIY workarounds. One set lasts a long time if you rinse them in isopropyl between sessions.
Which size should you pick
The set comes in two variants and they're not interchangeable — pick based on how much concentrate you want to load at once.
| Variant | Contents | Pad dimensions | Best for |
|---|---|---|---|
| Normal | 2 pads | Ø 28 × 4 mm | Full chamber loads, solo sessions with a larger dose |
| Small | 4 pads | Ø 15 × 5 mm | Micro-dosing, trying a new concentrate, testing small amounts |
Both sizes fit the PLENTY Filling Chamber Reducer — which is the smaller insert you drop into the main chamber. They do not work with the Dosing Capsules. If you're already using Dosing Capsules for dry herb, you'll need to swap to the reducer when switching to concentrates.
How much concentrate to use on the pad
Go minimal. Seriously. Experienced PLENTY users report that 0.1–0.2g per session works brilliantly with the liquid pad, and you can always reload.
Specifications
| Material | Stainless steel mesh |
| Brand | Storz & Bickel |
| Compatible device | PLENTY vaporiser |
| Compatible accessory | PLENTY Filling Chamber Reducer |
| NOT compatible with | PLENTY Dosing Capsules |
| Normal pad size | Ø 28 × 4 mm (2 pcs) |
| Small pad size | Ø 15 × 5 mm (4 pcs) |
| Reusable | Yes — rinse with isopropyl alcohol |
Complete your PLENTY concentrate setup with the PLENTY Filling Chamber Reducer (you need this for the pads to fit) and a Storz & Bickel Cleaning Brush Set for keeping the cooling coil spotless between sessions. For dry herb users switching between flower and wax, the PLENTY Drip Pad Set is the silicone-based alternative worth knowing about.
How to use the PLENTY Liquid Pad
- Open the PLENTY filling chamber and insert the Filling Chamber Reducer.
- Drop one liquid pad into the reducer — one Normal pad, or one Small pad depending on dose.
- Apply a small amount of concentrate (0.1–0.2g is plenty) directly onto the pad. Don't oversaturate.
- Close the chamber, set the PLENTY to your preferred temperature — most wax users run it between 190–210°C.
- Wait for the target temperature, then draw slowly and steadily.
- Let the unit cool between sessions. Click once more to restart the heating cycle if needed.
- When finished, remove the pad with tweezers and rinse in isopropyl alcohol. Dry fully before reuse.
Honest limitations
One thing to flag: liquid pads work best with thicker concentrates — waxes, budders, rosin, and crumble. Very thin oils or distillates will still soak through given enough heat, and you'll want to pair the pad with the drip-pad style setup or go easy on the load. Also, stainless steel mesh does eventually gunk up past the point of cleaning — plan on replacing the set every 6–12 months depending on how often you vape concentrates.
Frequently Asked Questions
Can I use the PLENTY Liquid Pad with Dosing Capsules?
No. The liquid pads are sized specifically for the PLENTY Filling Chamber Reducer. If you're using Dosing Capsules for dry herb, swap to the reducer when loading concentrates.
What's the difference between the Normal and Small pad set?
The Normal set contains 2 pads at Ø 28 × 4 mm for full chamber loads. The Small set contains 4 pads at Ø 15 × 5 mm for micro-dosing or testing a new concentrate. Both fit the same Filling Chamber Reducer.
How much wax or oil should I load onto the pad?
Start with 0.1–0.2g. Oversaturating is the single most common mistake — excess concentrate drips off the pad and into the cooling coil, which is exactly what you're trying to avoid. Reload if you want more, rather than front-loading.
Can I clean and reuse the liquid pads?
Yes. Soak them in isopropyl alcohol (90%+ works best), rinse, and dry fully before the next session. A set will typically last 6–12 months with regular concentrate use before the mesh clogs beyond cleaning.
Do liquid pads work with distillates and thin oils?
They work better with thicker concentrates like wax, budder, rosin, and crumble. Very thin oils and distillates can still run through the mesh when heated — use sparingly and expect some residue on the cooling coil regardless.
What temperature should I set the PLENTY to for concentrates?
Most wax and rosin users run the PLENTY between 190–210°C. The exact sweet spot depends on the concentrate's terpene profile — lower for flavour, higher for vapour density.
Last updated: April 2026
