EASY VALVE Screen Set
Vape accessories
by Storz & Bickel
EASY VALVE Screen Set for Volcano Vaporisers
The EASY VALVE Screen Set is a replacement screen pack designed for the Volcano vaporiser's EASY VALVE filling chamber system. These stainless steel mesh screens sit inside the filling chamber, filtering plant material from your vapour stream and keeping your balloon bags clean. Available in three variants — Normal (30mm), Normal Small (15mm), and Fine (30mm) — so you can match the screen to your specific chamber and material type.
Which Variant Do You Need?
| Variant | Diameter | Quantity | Best For |
|---|---|---|---|
| Normal | 30mm | 6 screens | Standard EASY VALVE Filling Chamber — your default pick for regular ground herb |
| Normal - Small | 15mm | 6 screens | EASY VALVE Filling Chamber Reducer — the smaller chamber insert for reduced loads |
| Fine | 30mm | 6 screens | Powdered or finely ground materials in the standard EASY VALVE Filling Chamber |
Not sure which size? If you're using the standard filling chamber without any reducer insert, grab the Normal (30mm). If you've got the Chamber Reducer fitted for smaller sessions, you need the Normal - Small (15mm). The Fine mesh variant is specifically for powdered materials — the tighter weave stops fine particles from passing through into your balloon.
Specifications for EASY VALVE Screens
| Spec | Value |
|---|---|
| Manufacturer | Storz & Bickel |
| System Compatibility | EASY VALVE (Volcano Classic, Volcano Digit, Volcano Hybrid with EASY VALVE) |
| Screens Per Set | 6 |
| Normal Screen Diameter | 30mm |
| Small Screen Diameter | 15mm |
| Fine Screen Diameter | 30mm |
| Material | Stainless steel mesh |
| SKU (Normal) | VS0091 |
| SKU (Normal - Small) | VS0168 |
| SKU (Fine) | VS0169 |
Complete your EASY VALVE maintenance kit: the EASY VALVE Replacement Set gives you fresh balloons and mouthpieces, while the EASY VALVE Filling Chamber Reducer pairs directly with the Normal - Small screens for smaller, more efficient loads. If your Volcano uses the Solid Valve system instead, check the Solid Valve Screen Set — the dimensions differ by roughly 6mm and they're not interchangeable.
Why Fresh EASY VALVE Screens Matter
Here's what actually happens when you ignore your screens: resin builds up in the mesh, airflow drops, and your Volcano has to work harder to push hot air through the filling chamber. You end up with thinner bags, weaker draws, and uneven extraction. The screen was the whole problem.
A clean screen means consistent airflow across the full surface area of your herb. The EASY VALVE chamber is wider than the Solid Valve by about 6mm in diameter, which gives you more exposed surface area for extraction. But that advantage disappears fast if the screen is clogged. Six screens in a pack means you can rotate fresh ones in while soaking the used ones, keeping your Volcano performing the way Storz & Bickel intended.
The honest limitation? These are consumables, full stop. No screen lasts forever, no matter how well you clean it. Residue gets baked into the mesh over time, and once airflow feels restricted even after a good soak, it's time for a new one. We'd say most people go through a screen every 3-6 weeks with regular use, though heavy daily sessions will shorten that. At six per pack, you're sorted for a good stretch.
How to Replace Your EASY VALVE Screen
- Remove the filling chamber from your Volcano and allow it to cool completely — the chamber retains heat, and handling it warm risks both burns and warping the screen during installation.
- Twist open the filling chamber housing to access the existing screen. If it's stuck with residue, a brief soak in isopropyl alcohol (90% or higher) loosens things up within 10-15 minutes.
- Lift out the old screen. Take note of the orientation — the screen sits flat against the bottom of the chamber with no gaps around the edges.
- Place the new screen into the chamber. For the Normal variant, you're fitting the 30mm screen into the standard EASY VALVE chamber. For the Normal - Small, it drops into the 15mm Chamber Reducer insert. Make sure the screen sits flush — any warping or lifting around the edges lets material through.
- Reassemble the filling chamber, load your material, and attach it to the Volcano. Run a test bag at around 185°C (365°F) to confirm airflow feels even and unrestricted.
How to Clean EASY VALVE Screens
You can extend the life of each screen significantly with regular cleaning. Drop used screens into a small glass jar with isopropyl alcohol (90%+) and let them soak for 20-30 minutes. For stubborn buildup, a soft-bristled brush — an old toothbrush works — gently loosens residue without damaging the mesh. Rinse thoroughly with warm water afterwards and let the screen dry completely before reinserting it. Never use a naked flame to burn off residue; it weakens the stainless steel and can warp the screen out of shape. If a screen still feels restricted after a proper clean, swap it out — that's what the other five in the pack are for.
Frequently Asked Questions
Do EASY VALVE screens fit the Solid Valve system?
No. The EASY VALVE screen is 30mm in diameter, while the Solid Valve uses a different, slightly narrower screen. The two systems are not interchangeable. Check which valve system your Volcano uses before ordering — if you have the Solid Valve, you need the Solid Valve Screen Set instead.
How often should I replace my Volcano EASY VALVE screen?
With regular cleaning, most screens last 3-6 weeks of daily use. The telltale sign is restricted airflow — if your bags are filling slowly or unevenly even after a thorough isopropyl soak, the mesh is done. Heavy users might go through screens faster, which is why the pack includes 6.
What is the Fine screen variant for?
The Fine screen has a tighter mesh weave designed specifically for powdered or very finely ground materials. Standard screens let fine particles pass through into the balloon bag. If you're vaporising anything ground to a near-powder consistency, the Fine variant (30mm) keeps your bags clean.
Can I use the Normal - Small screen without the Chamber Reducer?
No — the Normal - Small screen is 15mm in diameter, designed exclusively for the EASY VALVE Filling Chamber Reducer insert. It won't cover the full chamber opening on a standard 30mm filling chamber. You'd get herb falling around the edges and into places it shouldn't be.
How long does a Volcano balloon bag stay fresh after filling?
A filled balloon holds vapour well for about 5-10 minutes before it starts to thin out and condense on the bag walls. For the best experience, draw from the bag shortly after filling. Leaving it sitting around for 20+ minutes means noticeably staler, thinner vapour.
Does the EASY VALVE screen affect vapour temperature?
Not in any meaningful way. The screen's job is filtration, not temperature regulation — that's handled by the Volcano's heating element and your chosen temperature setting. A clean screen does allow more consistent airflow, which means more even heat distribution across your material.
Last updated: April 2026
