The MIGHTY Screen Set is a six-pack of replacement mesh screens for the Storz & Bickel MIGHTY vaporizer — four coarse upper screens and two regular-mesh lower screens, each 15mm across. Clean screens mean clean vapour, and clogged-up mesh is the number one reason your sessions start tasting like burnt toast.
Why your MIGHTY needs fresh screens
Every session leaves residue. Vaporised terpenes, resin, and fine plant particles build up on the mesh, and after a few weeks the screens stop looking silver and start looking amber. That gunk doesn't just sit there — it gets re-heated every time you fire up, and it changes the flavour of whatever you're vaping. Old screens taste stale. Fresh screens taste like the herb you actually put in.
There's also airflow. The MIGHTY's hybrid convection-conduction system relies on air moving cleanly through the chamber. Clogged screens choke the draw, the unit compensates by heating harder, and you end up with uneven extraction and a hotter mouthpiece.
Storz & Bickel recommend swapping the screens roughly every few weeks of regular use, or whenever you notice draw resistance creeping up. At six screens per pack, one set typically sees you through 3–6 months depending on how often you session.
What's in the set
The set contains six screens split across two types, matching the MIGHTY's chamber design.
| Screen type | Quantity | Mesh | Position |
|---|---|---|---|
| Upper screen | 4 | Coarse | Top of filling chamber, under the cooling unit |
| Lower screen | 2 | Regular | Bottom of filling chamber, above the heating element |
| Diameter | — | — | 15mm (fits MIGHTY and MIGHTY+) |
The 4:2 ratio matches how they wear out in real use — upper screens clog faster because they catch the vapour path and any loose particles heading towards the mouthpiece. Lower screens sit closer to the heat and degrade slower but still need swapping.
Compatibility — MIGHTY, MIGHTY+, and the Crafty family
These 15mm screens are designed for the MIGHTY and MIGHTY+. The Crafty and Crafty+ use a different screen size, so if you're running the smaller unit, grab the Crafty Screen Set instead. Everything else in the MIGHTY ecosystem — dosing capsules, cooling unit, mouthpiece — works around these screens without modification.
How to replace the screens
- Let the MIGHTY cool completely. Never swap screens on a hot unit — you'll burn your fingertips and warp the new mesh.
- Unscrew the cooling unit and set it aside. Empty any loose herb from the filling chamber.
- Use the Storz & Bickel cleaning brush (or a cocktail stick) to pop the old upper screen out of the cooling unit base. It sits in a small recess and lifts out cleanly once you get under the edge.
- For the lower screen, remove it from the bottom of the filling chamber the same way. Don't scrape the chamber walls — the coating matters.
- Drop in the new screens, coarse upper in the cooling unit, regular lower in the chamber base. They should sit flat with no lip.
- Reassemble and run one empty heating cycle at max temp to burn off any manufacturing residue before your next real session.
A quick word on cleaning vs replacing
You can soak screens in isopropyl alcohol to extend their life — dankgeek.com and the Storz & Bickel manual both mention this. Honestly, at six screens per pack, we'd just swap them. Soaking works once or twice, but the mesh stretches and the coarse upper screens lose their shape. Fresh screens are cheap compared to a compromised session.
Pairs well with the MIGHTY Cleaning Brush for scrubbing the chamber between sessions, and the Dosing Capsules 40-count if you want to skip the screen-clogging problem altogether — the capsules keep herb contained and dramatically extend screen life.
Frequently Asked Questions
How often should I replace the MIGHTY screens?
Every 3–6 weeks for regular users, more often if you session daily. Swap them sooner if you notice draw resistance, off flavours, or visible residue that won't clean off. Six screens typically last 3–6 months of normal use.
Do these fit the MIGHTY+ as well as the original MIGHTY?
Yes. Storz & Bickel kept the 15mm chamber dimensions identical between the MIGHTY and MIGHTY+ specifically so accessories are cross-compatible. Same screens, same dosing capsules, same cooling unit.
Can I clean the old screens instead of replacing them?
Short soak in isopropyl alcohol works once or twice, but the mesh stretches and clogs deeper over time. At six screens per pack, replacement is simpler and gets you back to clean vapour without the faff.
What's the difference between the upper and lower screens?
Upper screens are coarse mesh — they sit in the cooling unit and catch larger particles heading towards the mouthpiece. Lower screens are regular mesh — they sit above the heating element and protect the chamber base. The 4:2 ratio matches how fast each type wears out.
Will using dosing capsules reduce how often I need to change screens?
Yes, noticeably. Dosing capsules contain the herb in a small perforated pod, so far less loose material hits the screens directly. Heavy users who switch to capsules often double the lifespan of a screen set.
Are these genuine Storz & Bickel parts?
Yes. We stock the official MIGHTY Screen Set direct from Storz & Bickel — same screens that ship with new units from the factory. No aftermarket mesh, no generic substitutes.
Last updated: April 2026
