Mighty & Crafty - Water Tool Adapter
Vape accessories
by Storz & Bickel
Mighty and Crafty Water Tool Adapter by Storz and Bickel
The Mighty and Crafty Water Tool Adapter is a glass-on-glass connector that lets you run your Storz and Bickel portable vaporiser through any standard water pipe. Available in 14mm and 18mm joint sizes, it slots onto the cooling unit of your Mighty or Crafty and turns a dry vape session into a water-filtered one — cooler, smoother, and noticeably easier on the throat. If you already own a decent bong or bubbler, this little adapter unlocks a whole new way to use your portable.
Which Size Do You Need: 14mm or 18mm?
This comes down to your water pipe's downstem joint. Grab your bong and look at where the bowl sits — that's the joint you need to match. The 14mm (also called 14.5mm) is the most common size on small to medium glass pieces. The 18mm (18.8mm) is standard on larger bongs and scientific-style rigs. Not sure? Measure the inner diameter of the female joint on your water pipe. If a standard Bic pen drops in easily, it's 18mm. If it doesn't fit, you've got a 14mm. Pick the wrong size and it won't seat properly — so take 30 seconds to check before ordering.
| Variant | Joint Size | SKU | Best For |
|---|---|---|---|
| Water Tool Adapter 14mm | 14.5mm | VS0320 | Small to medium glass pieces |
| Water Tool Adapter 18mm | 18.8mm | VS0321 | Larger bongs, scientific rigs |
Specifications for the Mighty and Crafty Water Pipe Adapter
| Spec | Value |
|---|---|
| Compatible devices | Storz and Bickel Mighty, Mighty+, Crafty, Crafty+ |
| Available sizes | 14mm and 18mm |
| Connection type | Glass-on-glass, male joint |
| Attaches to | Cooling unit on Mighty or Crafty |
| Fits | Any standard water pipe with matching female joint |
| Material | Glass |
| Variants | 2 (14mm: VS0320, 18mm: VS0321) |
Complete your setup: If your Mighty or Crafty cooling unit seals are getting tired, pick up a set of Crafty and Mighty Seal Rings to keep the connection airtight. And if you're loading dosing capsules, the Storz and Bickel 40-pack Dosing Capsule Set keeps your sessions consistent — each capsule holds roughly 0.15g to 0.2g of ground herb, so you get precise, even extraction every time.
Why You Need a Water Pipe Adapter for Your Mighty or Crafty
The Mighty and Crafty already produce some of the best vapour of any portable on the market — the cooling unit does a solid job on its own. But there's a ceiling to what plastic and metal fins can do with hot air. After a few draws at 190°C or above, you'll feel that warmth building in your throat. It's not harsh exactly, but it's there. And if you're running longer sessions or packing the chamber full, that warmth adds up.
Running vapour through water changes the experience noticeably. The water cools the vapour down by another 10-15°C before it reaches your mouth, and it adds a touch of moisture back in. The result: bigger draws with zero throat irritation. You'll actually taste more of the terpene profile because you're not distracted by heat. We've had customers tell us they went back to lower temperatures after trying this adapter because the flavour was so much cleaner through water that they didn't need to crank the heat.
The honest limitation? This adapter turns your portable into a desktop setup. You're tethered to wherever your bong lives, which defeats the portability that makes the Mighty and Crafty so good in the first place. Think of it as a home-session upgrade rather than an everyday carry accessory. And because it's glass meeting plastic (the cooling unit), you'll want to be careful when attaching and removing it — don't force it, don't twist hard. Glass is glass. Compared to silicone WPA adapters from third-party brands, this glass-on-glass version gives you a purer flavour path with no off-gassing, but it's more fragile. If you're clumsy or plan to travel with it, a silicone adapter might be more forgiving — but you'll taste the difference.
How to Use the Mighty and Crafty Water Tool Adapter
- Fill your water pipe with enough water to submerge the downstem opening by about 1-2cm. Too much water and you'll get splashback; too little and you lose the filtration benefit.
- Remove the bowl piece from your water pipe's downstem, exposing the female glass joint (14mm or 18mm).
- Load your Mighty or Crafty chamber as usual — ground herb directly or via a dosing capsule (roughly 0.15g to 0.2g per capsule for even extraction).
- Attach the water tool adapter to the top of the cooling unit on your Mighty or Crafty. It sits where you'd normally place your mouth. Push it on gently until it seats snugly.
- Insert the adapter's male joint into the female joint on your water pipe's downstem. The glass-on-glass connection should create a natural seal without forcing.
- Power on your vaporiser and set your preferred temperature. For water-filtered sessions, you can comfortably run 185°C to 210°C without throat discomfort.
- Draw slowly and steadily through the water pipe mouthpiece. You'll see vapour travel through the water before reaching you. Take longer, slower draws than you would normally — the water adds slight resistance.
- When finished, carefully lift the vaporiser and adapter off the water pipe. Let the adapter cool before removing it from the cooling unit. Clean the adapter with isopropyl alcohol and warm water between sessions to prevent residue buildup.
