Storm Screens
Vape accessories
by Storm
We'll only email you about this product — no marketing.
Storm Screens for Your Storm Vaporizer
Storm Screens are a set of 6 replacement metal screens designed specifically for the Storm Vaporizer pen. Screens clog, residue builds up, and airflow drops — that's just what happens with regular use. This set gets your Storm Vaporizer drawing like it did on day one, with screens for every part of the vapour path.
What's in the Storm Screen Set
Each pack contains exactly 6 metal screens — 3 pairs, each cut for a different position in your Storm Vaporizer. Here's the breakdown:
| Screen Type | Quantity | Position |
|---|---|---|
| Mouthpiece screens | 2 | Inside the mouthpiece — filters fine particles before inhalation |
| Chamber screens | 2 | Base of the herb chamber — keeps material in place, maintains even airflow |
| Glass mouthpiece / water tool adapter screens | 2 | Fits the glass mouthpiece or water tool adapter connection |
Specifications
| Spec | Value |
|---|---|
| Product | Storm Screens |
| SKU | VS0138 |
| Total screens per pack | 6 |
| Material | Metal |
| Compatibility | Storm Vaporizer pen |
| Mouthpiece screens | 2 pcs |
| Chamber screens | 2 pcs |
| Glass adapter screens | 2 pcs |
If your Storm Vaporizer is due for a full refresh, grab a set of Storm Screens alongside replacement mouthpiece tips and a cleaning brush kit. Clean screens paired with a clean vapour path make a noticeable difference to flavour and draw resistance. Check out our vape accessories section for the full range of Storm Vaporizer parts.
Why Fresh Storm Screens Matter
Resin and plant matter build up on the mesh after a few sessions. Within a couple of weeks of regular use, you're pulling air through a partially blocked filter — which means less vapour, weaker flavour, and more draw resistance. It's like breathing through a clogged straw.
You can clean screens with isopropyl alcohol and they'll bounce back a few times, but metal mesh has a lifespan. The fine holes warp, residue bakes into the weave, and eventually no amount of soaking brings them back. At this price point, swapping in a fresh screen is faster and more effective than scrubbing an old one for the fifth time. We'd keep 2-3 sets on hand if you're a daily vaper — you'll go through them.
The honest limitation: these are Storm-specific screens. They're sized and shaped for the Storm Vaporizer pen only. They won't fit other vaporizer brands without modification, and trimming screens to fit a different chamber usually ends badly. If you're running a different device, check our vape accessories for universal screen options instead.
How to Replace Your Storm Screens
- Let your Storm Vaporizer cool down completely. Working with a hot chamber risks burns and makes residue stickier.
- Disassemble the mouthpiece from the vaporizer body. For the glass adapter, detach it carefully — the screen sits at the connection point.
- Use a small tool (a paperclip works, or the pick that came with your Storm) to gently pop out the old screen from each position. Don't force it — if it's stuck, a 10-minute soak in isopropyl alcohol loosens baked-on residue.
- Drop the new screen into position. The mouthpiece screen sits inside the mouthpiece housing. The chamber screen goes at the base of the herb chamber. The glass adapter screen slots into the adapter fitting.
- Press each screen flat with a fingertip or blunt tool. It should sit flush — no gaps around the edges, no bowing in the centre. A poorly seated screen lets material through and defeats the purpose.
- Reassemble your Storm Vaporizer, load the chamber, and take a test draw before heating. You should feel noticeably less resistance compared to your old screens.
