Mighty (+) - Wear & Tear Set
Vape accessories
by Storz & Bickel
Mighty+ Wear and Tear Set by Storz and Bickel
The Mighty+ Wear and Tear Set is an official Storz and Bickel maintenance kit that restores your portable vaporizer's cooling unit, mouthpiece, and filling chamber to factory condition. After months of daily sessions, resin builds up, seals degrade, and airflow drops — this kit contains every part you need to bring your Mighty+ back to how it performed on day one. One box, six component types, zero guesswork.
What Is Included in the Mighty+ Wear and Tear Kit
Every piece in this kit is a genuine Storz and Bickel replacement part — the same components that ship inside a brand-new Mighty+. Here is exactly what you get when you open the box:
| Component | Quantity | Function |
|---|---|---|
| Mouthpiece | 3 | Direct vapour path to your lips — wears down with heat cycling over time |
| Cooling Unit | 1 | The plastic spiral assembly that cools vapour before inhalation |
| Screen Set | 1 | Fine mesh screens that prevent plant material from entering the cooling unit |
| Filling Chamber Tool | 2 | Helps you load and tamp the oven evenly for consistent extraction |
| Cleaning Brush | 1 | Stiff-bristled brush sized to reach inside the oven and airpath |
That is 8 individual pieces across 5 component types. The cooling unit alone accounts for the biggest performance improvement — it is the single part that collects the most residue and restricts airflow first.
Specifications
| Spec | Detail |
|---|---|
| Brand | Storz and Bickel (Germany) |
| SKU | VS0337 |
| Compatibility | Storz and Bickel Mighty and Mighty+ |
| Parts Included | 8 pieces (3 mouthpieces, 1 cooling unit, 1 screen set, 2 filling chamber tools, 1 cleaning brush) |
| Authenticity | 100% original Storz and Bickel replacement parts |
| Material (Cooling Unit) | Medical-grade plastic, BPA-free |
| Material (Screens) | Stainless steel mesh |
Complete your setup: if you use dosing capsules with your Mighty+, grab the Storz and Bickel Dosing Capsule Set alongside this kit. Fresh screens plus clean capsules means zero residue transfer and maximum flavour from every session. Also worth considering: isopropyl alcohol and cotton buds for a deep clean before fitting your new cooling unit.
Why Your Mighty+ Needs a Fresh Cooling Unit
We have sold Storz and Bickel vaporizers since they first hit the market, and the number one maintenance question we get is always the same: "Why does my Mighty taste off?" The answer, about 9 times out of 10, is the cooling unit. That spiral plastic assembly sits directly in the vapour path, and after 50-100 sessions it accumulates a sticky layer of condensed resin that no amount of isopropyl soaking fully removes. The plastic itself starts to discolour, the o-ring seals lose their grip, and draw resistance creeps up until you are pulling harder than you should be.
The honest limitation of any vaporizer cooling unit is that it is a consumable part. Storz and Bickel engineered the Mighty+ so the cooling unit pops off and snaps back on in about 3 seconds — they clearly designed it to be replaced, not nursed along forever. A fresh unit restores the open, easy draw that made you fall in love with the Mighty+ in the first place. The flavour comes back, the vapour feels cooler, and the mouthpiece no longer has that slightly stale taste that clings to old plastic.
The mouthpieces wear down too. The flat lip piece on the Mighty+ takes a beating from teeth, heat, and cleaning solvents. Having 3 spares in one kit means you can rotate them or simply replace as needed over the next 6-12 months. And the filling chamber tools — those thin orange scoops — tend to snap or go missing. Two replacements in the box is a thoughtful touch from Storz and Bickel.
How to Replace the Cooling Unit on Your Mighty+
- Turn off your Mighty+ and let it cool completely. Working with a hot unit risks warping the new plastic cooling unit and burning your fingers.
- Grip the existing cooling unit by its edges and pull it straight up and off the oven housing. It unclips with a firm tug — no tools needed.
- Use the included cleaning brush to sweep out any loose debris from the oven chamber. A quick pass with a dry cotton bud around the rim removes residual buildup.
- Check the rubber seal ring on the oven housing. If it is intact and seated properly, leave it in place.
- Peel the protective film off the new screen from the screen set and place it into the bottom of the new cooling unit, flat side down.
- Snap the new cooling unit onto the oven housing. Press down firmly until you hear and feel it click into place on both sides.
- Attach one of the 3 new mouthpieces by sliding it into the top slot of the cooling unit until it locks.
- Run one empty heat cycle at 180 degrees Celsius to burn off any manufacturing residue from the new parts. Discard that first draw.
- Load your oven using the filling chamber tool — tamp gently, do not pack too tightly — and enjoy the restored airflow.
Mighty+ Wear and Tear Set vs. Mighty+ Cooling Unit Set
Storz and Bickel sell a standalone Cooling Unit Set as well, and we get asked about the difference constantly. The Cooling Unit Set gives you just the cooling unit and screens — nothing else. The Wear and Tear Set includes the cooling unit plus 3 mouthpieces, 2 filling chamber tools, and a cleaning brush. If your mouthpiece is still in good shape and you have tools and a brush lying around, the Cooling Unit Set saves you a few euros. But if you are doing a proper full refresh — which is what we would recommend after 3-4 months of daily use — the Wear and Tear Set is the better buy. You get everything in one go, and those spare mouthpieces alone justify the price difference.
Frequently Asked Questions
Does this Wear and Tear Set fit the original Mighty as well as the Mighty+?
Yes. Storz and Bickel designed the cooling unit and mouthpiece to be compatible with both the original Mighty and the Mighty+. The parts are interchangeable between both models.
How often should I replace the cooling unit on my Mighty+?
For daily users, every 3-4 months keeps performance and flavour at their best. Heavy users doing 4+ sessions a day should consider swapping every 6-8 weeks. You will notice tighter draw resistance and stale flavour when it is time.
Can I clean and reuse the old cooling unit instead of replacing it?
You can soak it in isopropyl alcohol (90%+) and it will work for a while longer. But the plastic absorbs residue over time and the internal spiral degrades. Cleaning extends life by a few weeks, but a fresh unit is noticeably better in both flavour and airflow.
Are dosing capsules worth using with the Mighty+?
Absolutely. Dosing capsules keep the oven cleaner for longer, which means your cooling unit and screens last longer too. They also make reloading on the go much faster. We would call them the single best accessory for any Mighty+ owner.
Is the battery replaceable on the Mighty+?
No, the Mighty+ has a sealed battery that is not user-replaceable. Storz and Bickel offer a repair service for battery issues. This Wear and Tear Set covers the cooling unit and mouthpiece assembly only — not internal electronics.
Will third-party cooling units work as well as this original Storz and Bickel one?
We have seen aftermarket cooling units come through the shop, and the fit is never quite right. The o-ring seal tends to be looser, draw resistance varies, and the plastic quality is visibly lower. For a device that costs as much as the Mighty+, original parts are worth it.
What temperature should I run my Mighty+ at after installing a new cooling unit?
Run one empty cycle at 180 degrees Celsius first to clear any manufacturing residue. After that, 180-195 degrees Celsius is the sweet spot for flavour. Going above 200 degrees Celsius produces denser vapour but can wear down the cooling unit faster over time.
Last updated: April 2026
