Grinder 'Herb Mill XL'
Vape accessories
by Storz & Bickel
Storz & Bickel Herb Mill XL Grinder
The Herb Mill XL is a 90mm extra-large herb grinder made by Storz & Bickel — the same German company behind the Volcano and Mighty vaporizers. Built with an oversized acrylic body and rows of extra-sharp teeth, it grinds large quantities of dried herb to a consistent texture in seconds. If you vape through a desktop unit and prep sessions in bulk, this is the grinder that keeps pace.
| Spec | Value |
|---|---|
| Brand | Storz & Bickel |
| Diameter | 90mm |
| Material | Acrylic |
| Type | 2-piece grinder (single chamber) |
| Tooth design | Multiple rows, extra-sharp |
| SKU | VS0319 |
| Best paired with | Volcano, Mighty+, Plenty vaporizers |
Already own a Storz & Bickel vaporizer? The Herb Mill XL was designed to feed those chambers directly. Pair it with Dosing Capsules for the Mighty or Crafty to pre-load ground herb and speed up your sessions even further. If you need a storage solution between grinds, a UV-blocking stash jar keeps your material fresh.
Why This XL Grinder Earns Its Place Next to Your Vaporizer
Most grinders sit around 50–63mm in diameter. That's fine for rolling a single joint, but if you're loading a Volcano bowl or prepping dosing capsules for the week, you're grinding batch after batch. The Herb Mill XL measures 90mm across — roughly 40% wider than a standard grinder — which means you can process significantly more material per twist.
We've handled hundreds of grinders over the years, and the thing that sets the Herb Mill XL apart is how effortless the twist feels even when it's packed full. The teeth are spaced and angled to pull herb downward rather than just mashing it. Sticky strains that gum up smaller grinders don't cause the same drag here. You get a medium-coarse grind that's spot-on for convection vaporizers, where airflow through the herb matters more than surface area.
One honest limitation: this is a 2-piece grinder, so there's no kief screen or separate collection chamber. If you're after a multi-stage grinder that sifts trichomes, the Santa Cruz Shredder 4-piece or a metal grinder with a mesh screen is the better pick. But if your priority is volume and a clean, consistent grind matched to Storz & Bickel vaporizers, the Herb Mill XL does that one job extremely well. According to research published in Cannabis and Cannabinoid Research, manual grinding with a handheld herb grinder yielded an average total cannabinoid content of 17.5 ± 0.5%, which was significantly higher than other preparation methods (Bueno & Greenbaum, 2020). Consistency matters.
How the 90mm Herb Mill XL Feels in Your Hands
Pick it up and the first thing you notice is how light it is. Acrylic keeps the weight down to well under 100g, which sounds trivial until you've spent five minutes twisting a heavy zinc-alloy grinder and your wrist starts complaining. The textured grip on the outer edge gives you enough purchase without needing to squeeze hard. It's a relaxed, two-handed twist — load, close, three or four rotations, done.
The teeth themselves have a slight curve to them. They're not the diamond-shaped cutting teeth you see on aluminium grinders; they're pointed pegs that shred rather than slice. The result is a slightly fluffier grind — think medium consistency rather than powder-fine. For vaporizer users, that's actually what you want. A grind that's too fine restricts airflow in conduction chambers and can pull through mesh screens. The Herb Mill XL lands in that sweet spot where the herb is broken down enough to expose surface area but still has enough structure to let hot air circulate.
How to Use the Storz & Bickel Herb Mill XL
- Remove the top half of the grinder by twisting it anticlockwise and lifting.
- Break your dried herb into rough pieces — about the size of a pea — and place them between the teeth. Don't overfill past the tooth line; the 90mm chamber holds plenty without packing it tight.
- Replace the top half and press down gently so the teeth interlock.
- Grip both halves and twist back and forth 3–5 times. You'll feel the resistance drop off once the herb is ground through.
- Remove the top half and tap it against the base to release any herb clinging to the teeth.
- Scoop or pour the ground material directly into your vaporizer chamber, rolling paper, or storage container.
- After each session, use a small brush (a clean paintbrush works) to sweep residue from the teeth. For a deeper clean every few weeks, soak both halves in warm water with a drop of washing-up liquid, rinse, and air-dry completely before the next use. Avoid isopropyl alcohol on acrylic — it can cause micro-cracks over time.
