Arizer XQ2 Tuff BowlGrips Pack
Vape accessories
by Arizer
Arizer XQ2 Tuff BowlGrips Pack
The Arizer XQ2 Tuff BowlGrips Pack is a set of two heat-safe silicone grips that slide over the ends of your glass bowl, protecting both the glass and your fingers during desktop vaping sessions. They're made specifically for the Arizer XQ2 and fit both the Glass Connoisseur Bowl and the Glass Cyclone Bowl — no guessing, no forcing, just a snug fit.
| Spec | Value |
|---|---|
| Quantity | 2 per pack |
| Material | Heat-safe silicone |
| Compatible device | Arizer XQ2 desktop vaporizer |
| Compatible bowls | Glass Connoisseur Bowl, Glass Cyclone Bowl |
| SKU | VS0299 |
| Manufacturer | Arizer |
Complete your XQ2 setup with replacement Glass Cyclone Bowls or Glass Connoisseur Bowls — having a spare means you can load a fresh bowl while the first one cools. If your whip tubing is looking tired, Arizer replacement whip kits are worth grabbing at the same time.
Why Your XQ2 Bowls Need Silicone Grips
Here's the thing about the Arizer XQ2: it heats up to 260°C. That ceramic heater does a brilliant job with your herbs, but it also turns your glass bowl into something you really don't want to grab bare-handed. We've seen customers juggle hot bowls like they're handling a fresh-from-the-oven baking tray — it's not graceful, and sooner or later the bowl meets the floor.
Glass bowls aren't cheap to replace, and a cracked Cyclone Bowl mid-session is properly annoying. The Tuff BowlGrips add a layer of silicone around each end of the bowl, giving you a cool, grippy surface to hold onto. They weigh almost nothing and stay put once fitted. The silicone feels slightly tacky to the touch — not sticky, just enough texture that the bowl won't slip out of your fingers even when you're relaxed and not paying full attention.
One honest limitation: they don't make the bowl itself cool down faster. The glass between the grips still holds heat for a minute or two after you pull it from the heater. So grip the silicone ends, not the middle. That said, for under a tenner, these save you from replacing a bowl that costs three or four times as much. We'd call that a no-brainer.
How to Fit Your Arizer XQ2 Tuff BowlGrips
- Remove the glass bowl from your Arizer XQ2 and let it cool completely. Fitting silicone onto hot glass is a bad time.
- Take one BowlGrip and stretch it gently over one end of the bowl. The silicone is flexible — it slides on without much force. Push it down until it sits flush against the lip of the glass.
- Repeat with the second BowlGrip on the opposite end.
- Check both grips are seated evenly. They should feel snug, with no loose edges that could catch when you insert the bowl into the heater.
- Reinsert the bowl into your XQ2 as normal. The grips are thin enough that they don't interfere with the fit inside the heater housing.
