Torch Hyper Lighter
Lighters & torches
by Silver Match
Torch Hyper Lighter — A Proper Blue Jet Flame for Dabs and Beyond
The Torch Hyper Lighter is a refillable butane jet lighter that produces a focused blue flame reaching up to 1,300°C — hot enough to heat a quartz banger in seconds or solder a wire in your workshop. Unlike soft-flame lighters that flicker and die in the slightest breeze, this one punches a concentrated jet that stays lit outdoors, indoors, and everywhere in between. It's the kind of tool that makes you wonder why you ever faffed about with cheap disposables.
Why the Torch Hyper Lighter Belongs on Your Desk
If you've ever tried to heat a titanium nail with a standard Bic, you already know the answer. Soft flames don't cut it for dabbing — you'll sit there for a full minute watching nothing happen, burning your thumb on the flint wheel. The Torch Hyper Lighter eliminates that problem entirely. Its single jet flame concentrates enough heat to bring a quartz banger to optimal temperature in roughly 30–45 seconds, depending on thickness.
But this isn't just a dabbing tool. We've seen customers use these for everything from caramelising crème brûlée to shrink-wrapping heat-seal tubing. The adjustable air and gas controls let you dial the flame from a tight, precise point (good for detail work) to a broader, more aggressive jet (good for heating larger surfaces quickly). That kind of control is what separates a proper torch lighter from a novelty gadget.
The honest limitation? It's a single-flame unit. If you're heating a 30mm banger, it'll take a bit longer than a dual or triple flame torch. For most people, that's fine — and you get significantly better fuel economy in return. At 220 minutes of continuous burn time per fill, you'll go weeks between refills with normal use.
What's in the Box
| Spec | Value |
|---|---|
| Flame type | Single blue jet |
| Maximum temperature | 1,300°C |
| Burn time per fill | 220 minutes continuous |
| Flame adjustment | Dual control (air + gas) |
| Fuel type | Refined butane (sold separately) |
| Ignition | Piezo-electric |
| Included accessories | Display rack |
| SKU | HS0150 |
How the Dual Adjustment Works
Most cheap torch lighters give you a single dial that controls gas flow — more gas means a bigger, sloppier flame. The Torch Hyper Lighter separates air and gas into two independent controls. Increasing gas without air gives you a larger, slightly cooler flame. Increasing air tightens and intensifies the jet. The sweet spot for dabbing is usually high air, moderate gas — you get a narrow, screaming-hot point that heats your nail without wasting fuel on a wide cone.
It's a small design detail, but once you've used a dual-adjust lighter, going back to a single-dial feels like cooking with oven mitts on. You just have more precision.
Complete your setup — pair the Torch Hyper Lighter with a quality dab rig or a DynaVap for on-the-go sessions. If you're running low on fuel, grab a can of refined butane to keep this thing topped up for months.
How to Use the Torch Hyper Lighter
- Fill the lighter by inserting a refined butane canister nozzle into the refill valve on the base. Hold upside down and press firmly for 3–5 seconds until the tank feels cold to the touch. Wait 2–3 minutes before igniting to let the butane settle and reach room temperature.
- Set both the air and gas adjustment dials to a mid-point position. This gives you a balanced starting flame you can fine-tune from there.
- Hold the lighter away from your face and any flammable surfaces. Press the ignition button — the piezo-electric spark should light the jet immediately.
- Adjust the gas dial to increase or decrease flame size. Then adjust the air dial to tighten or widen the jet. For dabbing, aim for a tight, intense blue cone.
- Direct the flame at your banger or nail at a 45° angle, heating evenly by rotating around the surface. For a quartz banger, 30–45 seconds typically reaches the right temperature.
- Release the ignition button to extinguish. Place the lighter on its included rack to cool — the nozzle tip gets hot during extended use.
Torch Hyper Lighter vs. Other Options
| Feature | Torch Hyper Lighter | Standard single-jet | Triple-flame torch |
|---|---|---|---|
| Flame temperature | Up to 1,300°C | ~1,000–1,100°C | ~1,200°C |
| Burn time per fill | 220 minutes | 60–90 minutes | 30–50 minutes |
| Flame control | Dual (air + gas) | Single (gas only) | Single (gas only) |
| Heating speed (30mm banger) | 30–45 seconds | 50–70 seconds | 15–25 seconds |
| Fuel efficiency | Excellent | Moderate | Low |
If speed is your only priority, a triple-flame torch wins. But you'll refill it four to five times more often, and the broader flame makes precision work nearly impossible. The Torch Hyper Lighter sits in the sweet spot: fast enough for daily dabbing, efficient enough that you're not buying butane every week, and precise enough for tasks beyond just heating a nail.
Care and Maintenance
- Purge the tank before refilling. Press the refill valve with a small tool (a pen tip works) until all remaining gas escapes. This prevents air pockets that cause misfires.
- Use triple-refined butane or better. Anything less leaves residue in the nozzle jet.
- If the flame weakens or sputters, clear the nozzle with a blast of compressed air. Don't use pins or needles — they can damage the precision orifice.
- Store upright on the included rack. Storing sideways can cause fuel to leak past internal seals over time.
- Keep away from direct sunlight and temperatures above 50°C. Pressurised butane expands with heat.
Frequently Asked Questions
How long does the Torch Hyper Lighter last on a single fill?
220 minutes of continuous operation. In practice, if you're using it for 30-second dab sessions, that translates to roughly 440 uses per fill — enough to last most people several weeks.
What type of butane should I use?
Triple-refined or higher. Cheap butane contains impurities that clog the jet nozzle and cause misfires. Brands like Colibri, Vector, or Newport are reliable choices available in our shop.
Can I adjust the flame size on this lighter?
Yes — and more precisely than most. The Torch Hyper Lighter has separate air and gas dials, giving you independent control over flame intensity and width. Most lighters only offer a single gas adjustment.
Is this lighter windproof?
Effectively, yes. Jet flames are pressurised and don't rely on ambient air currents to stay lit. You can use the Torch Hyper Lighter outdoors without cupping your hand around it.
Does it come filled with butane?
No. For shipping safety, torch lighters are sold empty. You'll need to fill it with refined butane before first use — takes about 5 seconds.
How do I choose the best lighter for dabbing?
Look for a jet flame (not soft flame), adjustable controls, and a burn time above 100 minutes. The Torch Hyper Lighter ticks all three and adds dual adjustment for precision. If you need faster heating and don't mind refilling more often, a dual or triple-flame torch is the alternative.
Can I use this for a DynaVap?
Absolutely — it's one of the best single-flame options for DynaVap heating. The focused jet gives you precise control over where you apply heat on the cap, which directly affects vapour temperature and density.
Last updated: April 2026
