Spear Bong Maker
Water pipes & bongs
Turn Any Bottle Into a Bong in Seconds
The Spear Bong Maker is a reusable stainless steel tool that transforms any plastic bottle into a functioning water pipe. At 17cm long with a beveled, sharp tip and a detachable bowl, it's the kind of thing you toss in a bag and forget about — until you need it. No glass to break, no bulky pieces to carry, and cleaning takes about thirty seconds.
| Spec | Value |
|---|---|
| Material | Stainless steel |
| Total length | 17cm |
| Components | Spear tube + detachable bowl (2 pieces) |
| Tip design | Beveled and sharpened for piercing plastic |
| SKU | HS0243 |
| Cleaning | Bowl detaches for separate cleaning |
| Weight | Lightweight — pocket-friendly |
Complete your setup with a decent grinder — the metal 4-piece grinders in the shop give you a consistent grind that packs better in the small bowl. A set of pipe screens is worth grabbing too, since the detachable bowl on the Spear Bong Maker benefits from a screen to keep things clean longer.
Why a Spear Bong Maker Belongs in Your Kit
We've sold glass bongs, acrylic bongs, silicone bongs — you name it. They all have one thing in common: they're fragile, bulky, or both. The Spear Bong Maker sidesteps the whole problem. It's a 17cm stainless steel tube with a sharp beveled end that punctures straight through a plastic bottle wall. Twist the bowl on top, fill the bottle with water, and you've got a water pipe. The whole assembly takes maybe 10 seconds once you've done it once.
The honest limitation here: you're smoking through a plastic vessel, and that's never going to match a proper glass piece for flavour. The steel spear itself is solid — you can feel the weight of it, and the machined bevel is genuinely sharp — but the bottle is disposable by design. That's the trade-off. What you lose in taste, you gain in portability and zero-stress usage. Drop it? Grab another bottle. Travelling light? It fits in a jacket pocket. Compared to a silicone travel bong, the Spear Bong Maker is smaller, cheaper, and arguably more fun because every session is a bit different depending on what bottle you find.
One thing we'd flag: pierce the bottle about a third of the way up from the base, at a downward angle, so the spear tip sits below the waterline. Too high and you lose the filtration. Too low and water comes up the tube. You'll figure out the sweet spot after one go.
How to Use the Spear Bong Maker
- Grab any plastic bottle — a standard 500ml water bottle works well, though a 1.5L bottle gives you a bigger chamber and cooler smoke. Make sure it still has the cap.
- Remove the detachable bowl from the top of the stainless steel spear. This gives you a clean, sharp tube to work with.
- Pierce the bottle roughly one-third up from the base. Angle the spear slightly downward so the tip will sit below the waterline once the bottle is upright. The beveled end cuts through plastic cleanly — push and twist.
- Fill the bottle with water through the top opening until the water level sits about 2-3cm above the submerged end of the spear. Not too much — you don't want water travelling up the tube.
- Reattach the detachable bowl to the top of the spear. Pack it with your herb of choice. Don't overpack; airflow matters.
- Remove the bottle cap, place your mouth over the bottle opening, light the bowl, and inhale slowly. The smoke travels down the spear, through the water, and up into the bottle chamber.
- After your session, detach the bowl and rinse both pieces under warm water. The 2-piece design means you can get into every surface. Let it dry and pocket it for next time.
