Mondo Spore Syringe Psilocybe Cubensis A+

Mondo Spore Syringe Psilocybe Cubensis A+ — Grow Albino Shrooms From Scratch

The Mondo Spore Syringe Psilocybe Cubensis A+ is a 20ml syringe loaded with Psilocybe cubensis A+ spores — an albino strain that produces ghostly white fruits with a reputation for strong visuals and intense physical sensations. One syringe gives you enough spores for up to two inoculations, so you can get two separate grows out of a single purchase. If you've been wanting to move beyond ready-made grow kits and try your hand at inoculating substrate yourself, this is a solid strain to start with: fast colonisation, decent yields, and a look that's unlike anything else on the shelf.

What Makes Psilocybe Cubensis A+ Worth Growing

Psilocybe cubensis A+ is an albino variety — the fruits come out almost entirely devoid of pigment, giving them a pale, ghostly appearance that makes them arguably the most visually striking cubensis strain out there. They tend to grow on the smaller side, but don't let that fool you. Smaller mushrooms of the same strain often carry a higher concentration of psilocybin per gram compared to their larger siblings, so what you lose in size you can gain in potency.

The effects are reported as strongly visual with pronounced physical sensations — a body load that you'll notice. That said, even within a single strain, individual mushrooms can vary wildly in potency depending on growing conditions, flush number, and genetics. So treat every harvest with respect and start cautiously.

Here's the honest limitation: A+ fruits are small. If you're after those photogenic dinner-plate-sized caps, this isn't your strain. But if you care more about what's inside the mushroom than how it looks on a scale, A+ delivers. We've seen growers get genuinely impressive hauls from these — just lots of smaller fruits rather than a few big ones.

What's in the Box

Cubensis A+ Cultivation Specs — Temperature and Timeline

Psilocybe cubensis A+ colonises fast — expect full colonisation in 8–10 days under the right conditions, with fruiting following over the next couple of weeks. But "right conditions" is doing a lot of heavy lifting in that sentence. Temperature control is non-negotiable with this strain.

If temperatures drop below those ranges, colonisation slows or stalls entirely. Too cold and the mycelium can simply die. A heat mat is a worthy investment — not optional if your room sits below 25°C. We've seen growers lose entire batches because they assumed room temperature was "close enough." It wasn't. Spend a tenner on a heat mat and save yourself the heartbreak.

Why Grow From Spores Instead of a Kit

Ready-made grow kits are brilliant — open the box, add water, wait. But growing from a spore syringe teaches you the actual process. You learn sterile technique, you understand colonisation, and you develop an eye for contamination before it ruins a batch. It's the difference between heating up a ready meal and actually learning to cook.

The trade-off is real, though. Spore syringes demand cleanliness that borders on obsessive. One ungloved hand, one uncovered sneeze near your substrate, and you're growing trichoderma instead of mushrooms. If you've never inoculated before, expect a learning curve on your first attempt. That's normal. The second time is always smoother.

Compared to a Mondo grow kit — which arrives with the substrate already colonised — a spore syringe gives you more control but more responsibility. If you want the fastest path to mushrooms, grab a grow kit. If you want to understand the craft, start here with spores. Both approaches work; it just depends on what you're after.

How to Use the Mondo Spore Syringe

1. Prepare your workspace. Clean every surface with isopropyl alcohol. Work in a still-air environment — a still air box (SAB) is cheap to build and dramatically reduces contamination risk. Close windows, turn off fans.
2. Sterilise the needle. Heat the hypodermic needle with a lighter or torch until it glows red. Let it cool completely before touching any substrate — injecting with a hot needle melts the plastic where the needle attaches to the syringe.
3. Shake the syringe. Spores settle during storage. Give the syringe a firm shake for 10–15 seconds to distribute spores evenly through the solution.
4. Wipe the injection port. Use the included alcohol swab to clean the injection port on your substrate bag or jar. Let it dry for 30 seconds.
5. Inject 3–5ml of spore solution per litre of substrate. Push the needle through the port, depress the plunger slowly, and distribute the solution across multiple points if possible.
6. Seal and store. Tape over the injection port if it doesn't self-heal. Place the inoculated substrate in a dark spot at 28–30°C. Don't open it, don't peek, don't breathe on it. Patience is your best tool now.
7. Wait 8–10 days for full colonisation. You'll see white mycelium spreading through the substrate. Once it's fully colonised (no uncolonised grain visible), drop the temperature to 23–26°C, introduce fresh air exchange, and wait for pins to appear.
8. Harvest when the caps begin to open but before they flatten out completely. Twist and pull gently at the base. Dunk the substrate in cold water for 12 hours, then set it up again for the next flush.

A+ Versus Other Cubensis Strains

If you're comparing the A+ to something like Golden Teacher or B+, here's the short version: Golden Teacher is the most forgiving strain for beginners — it tolerates temperature swings better and produces larger, more photogenic fruits. B+ is similar but tends to grow even bigger. A+ is the oddball of the family — smaller fruits, albino appearance, and a reputation for a more intense body effect. It's not harder to grow, but it's less tolerant of sloppy temperature control. If you can hold 28–30°C during colonisation and 23–26°C during fruiting, A+ rewards you with something genuinely different from the usual cubensis experience.

Frequently Asked Questions

Last updated: April 2026