Eyce Rig 2.0

Eyce Rig 2.0 Silicone Dab Rig

The Eyce Rig 2.0 is a platinum-cured silicone concentrate rig that pairs a titanium nail with a virtually indestructible body — built for the clumsy, the adventurous, and anyone tired of replacing glass. Standing at roughly 15 cm tall, it packs a borosilicate glass collar, a hidden stash compartment, and dab tool slots into a package that weighs next to nothing and shrugs off drops that would shatter a standard rig.

What's Included with the Eyce Rig 2.0

You're not just getting a silicone shell — the Rig 2.0 arrives ready to use straight out of the box. Here's everything inside:

• Platinum-cured silicone rig body with reinforced walls
• Titanium nail (10 mm fitting)
• 10 mm borosilicate glass collar (heat barrier between nail and silicone)
• Built-in concentrate stash compartment underneath the pipe
• Four integrated dab tool slots

The glass collar is the detail that matters most here. It sits between the titanium nail and the silicone chamber, acting as a heat shield so the body never gets dangerously hot or degrades from repeated torch exposure. Eyce thought this through — the silicone stays cool to the touch even during extended sessions.

Eyce Rig 2.0 Specifications

Every number you need before you buy, in one place.

Why the Eyce Rig 2.0 Might Be the Last Dab Rig You Buy

Glass rigs are brilliant — until they're not. One knock off the table, one fumble reaching for the torch, and you're sweeping shards off the floor and shopping for a replacement. We've seen it happen hundreds of times. The Eyce Rig 2.0 exists because Eyce got tired of that cycle too.

The platinum-cured silicone body is the same medical-grade material you'd find in baking moulds and baby bottle teats. It flexes on impact instead of cracking. You can literally drop this rig onto concrete and pick it up without a scratch. The reinforced walls add extra rigidity where it counts — around the base and the water chamber — so it doesn't flop around when you're heating the nail. It feels solid in the hand, not flimsy. There's a satisfying heft to it despite being featherlight compared to glass.

The one honest limitation: flavour purists who exclusively use quartz bangers may notice a slight difference in taste compared to an all-glass setup. Titanium nails heat quickly and retain heat well, but they don't deliver quite the same clean flavour profile as quartz at low temperatures. That said, for portability, durability, and sheer convenience, the Rig 2.0 is hard to beat. If you're the sort who takes your rig to a mate's house, to a festival, or just uses it on the sofa where things get knocked over — this is the one we'd pick over glass every single time.

Silicone Dab Rig vs Glass Dab Rig

The choice between silicone and glass comes down to what you value more: flavour purity or peace of mind. Here's how they stack up.

If you already own a glass rig for home sessions and want something bombproof for travel or outdoor use, the Eyce Rig 2.0 is the best silicone dab rig for that job. If you only want one rig and durability matters more than chasing the absolute cleanest low-temp flavour — this is it.

How to Use the Eyce Rig 2.0

The Rig 2.0 works like any standard concentrate rig, with a few extra touches worth knowing about.

1. Fill the silicone chamber with water through the mouthpiece. You want just enough to cover the downstem opening — roughly 2-3 cm of water. Inhale gently without the nail heated to test the water level. If water reaches your lips, pour a bit out.
2. Insert the borosilicate glass collar into the 10 mm joint if it's not already in place. This is your heat barrier — never skip it. The collar prevents torch heat from transferring directly to the silicone.
3. Place the titanium nail into the glass collar. It should sit snugly.
4. Heat the titanium nail with a butane torch. Aim for the base and sides of the nail. Titanium heats up in about 20-30 seconds — you'll see it start to glow faintly if you overshoot. For better flavour, let it cool for 10-15 seconds after heating before applying your concentrate.
5. Use a dab tool to apply a small amount of concentrate onto the hot nail while inhaling slowly through the mouthpiece. The water in the chamber filters and cools the vapour.
6. Exhale and enjoy. Store your dab tool in one of the 4 built-in slots, and tuck your leftover concentrate into the stash compartment underneath the pipe.

Cleaning and Maintaining Your Eyce Silicone Rig

Silicone is far more forgiving than glass when it comes to cleaning, but residue still builds up. A quick wipe after each session keeps things fresh. For a deeper clean:

1. Disassemble the rig — remove the titanium nail and the borosilicate glass collar.
2. Rinse the silicone body with warm water to flush out any loose residue.
3. Soak the titanium nail and glass collar in isopropyl alcohol (90% or higher) for 15-30 minutes. For stubborn buildup on the nail, a quick torch pass burns off carbon deposits.
4. For the silicone body, you can either soak it in isopropyl or — and this is the trick we prefer — pop it in the freezer for 2-3 hours. Concentrate residue becomes brittle when frozen and peels right off the silicone walls.
5. Rinse everything thoroughly with warm water before reassembling. Let it air dry completely.

The freezer method is genuinely satisfying. You'll hear the resin crack away from the silicone like ice off a windscreen. It works because silicone is non-stick by nature — residue bonds to it far less than it does to glass or metal.