Drummer Boy Mini Rig Kit
Dab rigs & tools
by Goody Glass
We'll only email you about this product — no marketing.
Drummer Boy Mini Rig Kit by Goody Glass
The Drummer Boy Mini Rig Kit is a 4-piece dab rig set built around a compact water pipe with a showerhead percolator that cools your vapour while keeping air contact to a minimum. Made by Goody Glass, this mini dab rig stands just tall enough to do serious work — filtering concentrates through water for smooth, flavourful draws — yet small enough to toss in a bag and forget about until you need it. Available in Clear and Smoke finishes, it ships with everything you need to start dabbing straight out of the box: the rig itself, a banger, a dab tool, and a carb cap.
Clear vs Smoke — Which Finish?
Both variants are identical in function. The Clear version lets you watch the vapour churn through the percolator — handy for knowing when to pull, and satisfying in its own right. The Smoke finish has a tinted grey-black glass that hides residue build-up between cleans. If you're meticulous about maintenance, go Clear. If you'd rather not see yesterday's session, Smoke is your friend.
| Spec | Detail |
|---|---|
| Brand | Goody Glass |
| Product Type | Mini Dab Rig Kit |
| Percolator | Showerhead |
| Kit Contents | 1 x Mini Rig, 1 x Banger, 1 x Dab Tool, 1 x Carb Cap |
| Variants | Clear (HS2622), Smoke (HS2621) |
| Design Focus | Vapour cooling with minimal air contact |
| Portability | Backpack-friendly |
Complete your setup: A butane torch is the one thing this kit doesn't include — you'll need one to heat the banger. Pair the Drummer Boy with a quality torch lighter and some cotton swabs for post-dab cleaning, and you've got a self-contained concentrate station that fits in a shoebox.
Why This Mini Dab Rig Earns Its Spot
We've handled a lot of mini rigs over the years, and the recurring problem is always the same: manufacturers shrink the body but forget to include proper filtration. You end up with a tiny pipe that hits harsh and hot — defeating the entire point of running vapour through water in the first place. The Drummer Boy sidesteps that issue with its built-in showerhead percolator, which breaks the vapour into smaller bubbles across multiple slits before it reaches your lungs. More surface area in contact with water means cooler, smoother draws — even from a rig this compact.
The other thing we appreciate is that Goody Glass ships this as a complete 4-piece kit. Buying a rig, then hunting for a compatible banger, then realising you still need a carb cap and a dab tool — that's an annoying afternoon. Everything here is sized to work together out of the box. The banger fits the joint, the carb cap fits the banger, and the dab tool is included so you're not improvising with a paperclip. It sounds basic, but you'd be surprised how many kits skip one of these pieces.
The honest limitation? It's small. That's the whole point, but it means the water chamber holds less liquid, so you'll want to change the water more frequently than you would with a full-size rig. Stale water in a mini rig affects flavour faster — we'd swap it every session or two. The compact size also means the vapour path is shorter, so while the showerhead percolator does solid work, don't expect the same level of cooling you'd get from a 25cm recycler with multiple chambers. For its size, though, the Drummer Boy punches well above its weight. If you want a full desktop experience, look at a larger recycler rig. If you want something genuinely portable that still filters properly, this is the one we'd pick.
What's in the Drummer Boy Mini Rig Kit
Every Drummer Boy ships as a ready-to-use 4-piece set. No guessing about compatibility, no extra purchases required beyond a heat source. Here's exactly what you'll unbox:
| Piece | Purpose |
|---|---|
| Mini Rig with Showerhead Percolator | The main water pipe — filters and cools vapour through multiple percolator slits |
| Banger | The quartz nail where you heat and vaporise your concentrate |
| Dab Tool | Metal pick for handling sticky concentrates and placing them onto the heated banger |
| Carb Cap | Covers the banger after loading to trap heat and regulate airflow for lower-temperature dabs |
How to Use the Drummer Boy Mini Dab Rig
- Fill the rig with water. Pour room-temperature water through the mouthpiece until the showerhead percolator slits are submerged by roughly 1cm. Too much water and you'll get splashback; too little and the percolator can't do its job. Do a dry pull (inhale without heating) — if water touches your lips, pour a bit out.
- Heat the banger. Use a butane torch to heat the bottom of the banger evenly. Heat for about 25–30 seconds until it glows faintly, then let it cool for 30–45 seconds. Lower temperatures preserve flavour; higher temperatures produce thicker clouds. Finding your sweet spot takes a few sessions — start cooler and work up.
- Load your concentrate. Use the included dab tool to pick up a small amount of concentrate — roughly the size of a grain of rice for your first go. Touch it to the inside wall of the heated banger. It should sizzle gently, not scorch instantly. If it burns on contact, your banger is too hot; wait longer next time.
- Cap and inhale. Immediately place the carb cap over the banger. This traps the heat and lets the concentrate vaporise at a lower, more flavourful temperature. Draw slowly and steadily through the mouthpiece. You'll see the vapour travel through the water and percolator before reaching you.
- Clean after each session. While the banger is still slightly warm (not hot), use a cotton swab to wipe out any residual concentrate. This prevents carbon build-up that ruins flavour and weakens glass joints over time. Rinse the rig with warm water and let it air-dry.
Keeping Your Mini Dab Rig in Top Shape
Glass rigs last years if you treat them right, and they taste terrible within days if you don't. The showerhead percolator in the Drummer Boy has small slits that can clog with reclaim — that sticky residue left behind after vaporising concentrates. Once those slits are blocked, airflow drops and the rig becomes harder to draw through.
For daily maintenance, swap the water after every 1–2 sessions. Once a week (or whenever you notice reduced airflow), soak the rig in isopropyl alcohol (90% or higher) with a tablespoon of coarse salt. Shake gently, let it sit for 20–30 minutes, then rinse thoroughly with warm water. The salt acts as an abrasive against stuck-on residue without scratching the glass. The banger benefits from the same treatment — a clean banger means clean flavour. If you let reclaim build up on the banger, every subsequent dab will taste like a ghost of sessions past. Not in a good way.
Frequently Asked Questions
Does the Drummer Boy Mini Rig Kit work with dry herb, or only concentrates?
It's designed specifically for concentrates — wax, shatter, rosin, and similar products. The included banger is made for vaporising concentrates, not combusting dry herb. If you want to use dry herb, you'd need a different bowl piece, but honestly, mini rigs like this are optimised for concentrates and won't give you a great dry herb experience.
How much water should I put in the Drummer Boy mini rig?
Fill until the showerhead percolator slits sit about 1cm below the waterline. Do a test pull without heating — if water reaches your lips, pour some out. Getting the level right takes 30 seconds of trial and error on your first fill.
What's the difference between the Clear and Smoke variants?
Purely cosmetic. Same glass, same percolator, same kit contents. Clear lets you watch the vapour path in action; Smoke hides residue between cleans. Pick whichever you prefer the look of.
Is a mini dab rig worse than a full-size rig?
Not worse — different. A mini rig has a shorter vapour path, so you get slightly less cooling compared to a large recycler. The trade-off is portability and discretion. The Drummer Boy's showerhead percolator compensates well for its size, but if cooling is your top priority and you never leave the house, a larger rig will always win on that front.
Do I need a torch to use this dab rig?
Yes. A butane torch is the standard heat source for bangers and isn't included in the kit. A small kitchen torch works, but a proper dab torch gives you more control over heating time and temperature. Budget for one if you don't already own one.
How often should I clean the showerhead percolator?
Swap the water every 1–2 sessions. Do a full isopropyl alcohol soak once a week or whenever you notice reduced airflow through the percolator slits. Consistent cleaning keeps the flavour clean and the draw smooth.
Can I travel with the Drummer Boy Mini Rig?
That's one of its main selling points — it's small enough to fit in a backpack. Wrap it in a cloth or small padded case to protect the glass and banger during transport. Empty the water before packing, obviously.
Last updated: April 2026
