Bubbleator B-Quick
Harvest & curing
by Pollinator
Bubbleator B-Quick Crystal Extractor
The Bubbleator B-Quick is a portable water-ice extraction machine that separates trichome crystals from plant material in 5–10 minutes flat. Designed by Mila Jansen's Pollinator Company — the outfit that literally invented automatic trichome separation — this is the fastest all-in-one bubble hash system you can buy without going industrial.
What's Included in the Bubbleator B-Quick
Every Bubbleator B-Quick ships ready to run — no hunting for accessories or bodging together a setup from mismatched parts. Here's what you get in the box:
- Bubbleator B-Quick machine unit with built-in carry handles
- Thermometer for monitoring water temperature
- Pyramid bag (220 micron) — holds approximately 400g of dry plant material
- Cleaner bag (220 micron) — catches coarse debris before it reaches the crystal bag
- Crystal catching bag (70 micron) — where your final product collects
You supply the cold water, ice, plant material, a collection bucket, and a power socket. That's it. No pumps, no separate agitators, no engineering degree required.
Bubbleator B-Quick Specifications
| Spec | Value |
|---|---|
| Manufacturer | Mila's Pollinator Company (Amsterdam) |
| SKU | HS0665 |
| Extraction method | Water-ice agitation (bubble hash) |
| Filtration stages | 3 bags (220μm pyramid, 220μm cleaner, 70μm crystal catcher) |
| Capacity | ~400g dry plant material per run |
| Extraction time | 5–10 minutes per cycle |
| Power | Mains electricity (standard socket) |
| Portability | Lightweight with built-in carry handles |
| Includes thermometer | Yes |
Complete your extraction setup with a set of drying screens for curing your bubble hash properly after collection. A precision digital scale is also worth having — you'll want to weigh your yield per run to dial in your process over time.
Why the Bubbleator B-Quick Beats Hand-Stirring
If you've ever stood over a bucket with a wooden spoon for 20–30 minutes, manually agitating plant material in ice water, you already know the problem. Your arms ache, the water temperature creeps up because you can't stir and add ice at the same time, and the results are inconsistent from batch to batch. Some runs come out golden, others look like swamp water. The variable is always you — how fast you stirred, how long you went, whether you got distracted halfway through.
The Bubbleator B-Quick removes the human error. Its drive system creates consistent, non-intrusive agitation that knocks trichome heads loose without shredding the plant material into green mush. That distinction matters more than most people realise. Aggressive agitation — whether by hand or by a machine that's basically a repurposed washing machine — breaks open cell walls and releases chlorophyll into your water. You end up with hash that's green-tinged, tastes grassy, and melts poorly. The Bubbleator's gentler motion means the trichome stalks snap cleanly. Your 70-micron crystal bag catches heads, not debris.
We've seen customers switch from hand methods to the Bubbleator and immediately notice the colour difference. Paler, sandier output on the first run. That's not magic — it's just controlled agitation doing what your tired forearms couldn't.
How the 3-Bag Filtration System Works
The Bubbleator B-Quick uses a three-stage filtration process that's simpler than it sounds. Each bag has a specific mesh size measured in microns (μm), and the order matters.
The 220-micron pyramid bag sits inside the machine and holds your plant material. Think of it as the work bag — ice, water, and cannabis go in here. The 220-micron mesh is wide enough to let trichomes pass through but catches all the larger leaf and stem fragments. The pyramid shape keeps material moving during agitation rather than packing down into a dense puck at the bottom.
The 220-micron cleaner bag acts as a secondary filter, catching any plant debris that slipped through the first stage. This is the step most DIY bucket setups skip, and it's why their hash often has visible green flecks in it.
The 70-micron crystal catching bag is where the magic happens. Trichome heads — the resin glands containing the compounds you actually want — typically measure between 25 and 120 microns. The 70μm mesh catches the bulk of mature, full-sized heads while letting water and fine particulate pass through into your collection bucket. What you scrape off this bag is your bubble hash.
How to Use the Bubbleator B-Quick
- Place the pyramid bag (220μm) inside the Bubbleator B-Quick unit. Load it with up to 400g of dry plant material — or proportionally less if you're doing a smaller run. Dry, cured material works best. Fresh-frozen is possible but yields differ.
- Add cold water and plenty of ice. You want the water temperature as close to 0–4°C as practical. Use the included thermometer to check. Cold water makes trichomes brittle, which is the whole point — brittle heads snap off cleanly.
- Stack the cleaner bag (220μm) and crystal catching bag (70μm) in your collection bucket beneath the Bubbleator's drain outlet, in that order. Cleaner bag on top, crystal catcher underneath.
- Plug in and run the Bubbleator for 5–10 minutes. Start with a shorter cycle for your first run — you can always do a second pass, but you can't un-agitate material that's been beaten too long.
- Once the cycle finishes, drain the water through the bag stack into your collection bucket. Let it flow — don't squeeze the bags, or you'll force plant matter through the mesh.
- Carefully remove the crystal catching bag. The wet, sandy-looking material collected on the 70μm mesh is your bubble hash. Scrape it onto a drying screen or parchment paper.
- Spread the hash thinly and allow it to dry in a cool, dark space with good airflow. Drying takes 24–72 hours depending on humidity. Don't rush this — wet hash goes mouldy.
- Optional: run a second cycle with the same material. The first run captures the majority of trichomes, but a second 5–10 minute pass often yields another 10–20% of usable product, typically slightly lower grade.
The Pollinator Company: Who Makes This
Mila Jansen — often called the Hash Queen of Amsterdam — founded the Pollinator Company in 1994. She invented the original Pollinator dry-sift machine and later developed the Ice-O-Lator water extraction method that the entire bubble hash world now uses. The Bubbleator B-Quick is the latest iteration of her Bubbleator line, designed to bring water-ice extraction to a smaller, faster, more portable format. When you buy a Pollinator Company product, you're buying from the people who invented the category, not someone who copied it.
Frequently Asked Questions
How long does a single extraction cycle take with the Bubbleator B-Quick?
5–10 minutes per cycle. A shorter first run (5 minutes) followed by a second pass of the same material is often better than one long 15-minute session, which risks over-agitating and pulling chlorophyll into your product.
Can I use fresh-frozen plant material instead of dried?
Yes, though the Bubbleator B-Quick's 400g capacity is rated for dry material. Fresh-frozen weighs significantly more per volume, so you'll fit less per run. The upside of fresh-frozen is terpene preservation — the hash often smells more like the living plant.
How much bubble hash does the Bubbleator B-Quick yield per run?
Typical yields range from 10–20% of the dry input weight, depending on the quality and trichome density of your starting material. From 400g of well-grown, trichome-heavy material, expect roughly 40–80g of wet hash, which reduces after drying.
Do I need to buy additional filter bags?
Not to get started — the Bubbleator B-Quick includes all three bags (220μm pyramid, 220μm cleaner, 70μm crystal catcher). Replacement bags are available separately if yours wear out over time. Rinse them with cold water after each use and they'll last for dozens of runs.
How do I know when trichomes are ready for harvesting?
Use a jeweller's loupe or pocket microscope (60–100x magnification) to inspect trichomes on the plant. Clear heads mean too early; milky-white heads are at peak potency; amber heads indicate degradation has begun. Most growers harvest when roughly 70–80% of heads are milky with 20–30% turning amber.
Is the Bubbleator B-Quick noisy?
It's quieter than you'd expect — roughly comparable to a kitchen blender on a low setting. The drive system is designed for gentle agitation, not violent spinning, so it doesn't rattle or vibrate heavily. You won't wake the neighbours, but it's not silent either.
How do I clean the Bubbleator B-Quick after use?
Rinse all three bags with cold water immediately after use — warm water melts trichomes into the mesh and clogs it. The machine itself just needs a wipe-down. Avoid soap on the bags; cold water and gentle rubbing is enough. Let everything air-dry before storing.
Last updated: April 2026
