Original Quick Grinder V3
Grinders
by Quick Grinder
We'll only email you about this product — no marketing.
Original Quick Grinder V3: The Herb Grinder That Actually Improves on the Concept
The Original Quick Grinder V3 is a 2-piece aluminium herb grinder that replaces the traditional twist-apart design with a button release system and friction-free milling plates. Instead of wrestling with a sticky, gunked-up grinder after a few weeks of use, you press two buttons, the plates separate, and your ground herb falls free. It's one of those products that makes you wonder why nobody thought of it sooner.
Pick Your Colour
| Variant | SKU |
|---|---|
| Purple | HS1396 |
| Orange | HS1764 |
| Cyan | HS1765 |
| Red | HS1395 |
All four colours are the same grinder mechanically — same aluminium body, same tooth geometry, same button mechanism. Pick whichever one you won't lose in a messy drawer.
Why the Original Quick Grinder V3 Beats a Standard Twist Grinder
Most 2-piece grinders work the same way: twist the lid, hope the herb falls out, scrape what's stuck to the teeth with your fingers or a brush. The Original Quick Grinder V3 changes that entire process with two design choices that actually matter in daily use.
First, the teeth. One side is angled at 30° and the other at 45°. That's not a random spec — it means the herb gets sheared from two different angles simultaneously, producing a more even, consistent grind. You won't end up with half-powder, half-chunks like you do with cheap grinders that have symmetrical pegs. The rounded tooth profile also means fibrous material doesn't wrap around the teeth and jam the mechanism. We've had grinders on our shelves since 1999, and tooth geometry is genuinely the difference between a grinder that works for years and one that seizes up after a month of sticky herb.
Second, the button release. Press the buttons on top and the grinding plates shift, breaking the seal between ground herb and metal. Anything lodged between the teeth gets knocked loose. You're not digging around with a toothpick or tapping the grinder against your palm like a ketchup bottle. It's a small thing, but after a few hundred uses, it adds up to a lot less wasted herb and a lot less frustration.
The polythene joint between the two halves creates a tight, airtight-ish seal while grinding. No herb escapes mid-twist, and the plastic-on-metal contact means you don't get that horrible metal-on-metal grinding feel that cheaper aluminium grinders develop over time. The action stays smooth.
Specifications
| Spec | Value |
|---|---|
| Material | Aluminium |
| Pieces | 2-piece design |
| Tooth Angles | 30° on one plate, 45° on the other |
| Joint Type | Polythene (friction-free seal) |
| Opening Mechanism | Button release system |
| Available Colours | Purple, Orange, Cyan, Red |
| Tooth Profile | Rounded, strategically positioned |
| Capacity | Generous — handles large, sticky nugs |
Complete your setup: the Original Quick Grinder V3 pairs well with a rolling tray to catch loose herb after pressing the release buttons. If you're grinding for a vaporiser, a set of dosing capsules keeps your freshly ground material organised and ready to load.
What It Feels Like in Your Hands
The aluminium body has a solid, reassuring weight to it — not heavy, but dense enough that it doesn't feel like a toy. The grinding action is genuinely smooth. There's no gritty resistance, no wobble between the two halves. The polythene joint does its job: you twist and the plates glide past each other without catching. It's the kind of tactile feedback that tells you straight away this thing was engineered, not just stamped out of a mould.
The buttons on top have a satisfying click. They're firm enough that you won't accidentally pop the grinder open in your pocket, but not so stiff that you need two hands. One press and the lid lifts cleanly. The interior has enough room for a decent session's worth of herb — you're not cramming a tiny pinch in and grinding three times to fill a bowl.
Honest limitation: this is a 2-piece grinder, so there's no kief catcher or separate storage compartment. If you want a multi-chamber setup that collects fine particles, you'll need something like a 4-piece grinder instead. But if you value speed, ease of cleaning, and a grind that's consistently even, the 2-piece design with the button release is hard to beat. Fewer parts means fewer places for herb to get trapped and go stale.
How to Use the Original Quick Grinder V3
- Press the two buttons on top of the grinder to release the lid and separate the two halves.
- Break your herb into rough pieces and place them on the lower grinding plate, spreading them across the teeth. The chamber is generous, so don't be shy — it handles large, sticky nugs without issue.
- Place the lid back on top. The polythene joint creates a snug, friction-free seal. You'll feel it click into place.
- Twist the lid back and forth. The dual-angled teeth (30° and 45°) shear the herb from both sides simultaneously. A few twists is usually enough — you'll feel the resistance drop when the herb is evenly ground.
- Press the release buttons again to open. The button mechanism shifts the grinding plates, knocking loose any herb stuck between the teeth.
- Tap the ground herb out onto your rolling tray, into your vaporiser chamber, or wherever it's headed.
- Give the grinder a quick brush after each use. A small stiff-bristled brush clears residue from the teeth and keeps the action smooth for next time. The aluminium body can also be cleaned with isopropyl alcohol for a deeper clean every few weeks.
