Cone Snuffer
Ashtrays
by RAW
RAW Cone Snuffer — Save Your Smoke for Later
The RAW Cone Snuffer is a purpose-built joint extinguisher that lets you safely put out a cone or blunt mid-session without crushing, bending, or wasting what's left. Designed by RAW — the same crew behind those unbleached rolling papers you've seen everywhere — this compact metal tool taps off ash, snuffs the cherry through a conical centre hole, and sits securely on your tray thanks to a built-in magnet. No more stubbing out a half-smoked joint against the ashtray like a barbarian. If you're looking to buy a simple, reliable snuffing tool, this is the one most of our customers reach for.
| Spec | Value |
|---|---|
| Brand | RAW |
| SKU | HS1259 |
| Material | Metal |
| Key feature | Conical centre hole for gentle extinguishing |
| Ash removal | Round tap points on the surface |
| Magnet | Bottom-mounted; attaches to metal trays and ashtrays |
| Compatible with | Pre-rolled cones, hand-rolled joints, blunts |
| Weight | Approximately 45 g |
Complete your setup: pair the cone snuffer with a RAW Metal Rolling Tray — the magnet locks straight onto the tray surface so the snuffer stays put. A RAW Cone Loader or RAW Six Shooter also makes a solid companion if you like to pre-roll a few cones for the evening. For storage between sessions, a RAW Doob Tube keeps your half-smoked joint fresh after you've snuffed it.
Why You Actually Need a Cone Snuffer
Here's the situation we've seen play out a thousand times: someone rolls a solid cone, lights it up, takes a few good pulls, and then needs to stop. Maybe the doorbell rings. Maybe they just hit the right level and don't want to overdo it. So they mash the lit end into the ashtray, crushing the paper, deforming the tip, and losing a good centimetre of smokeable material in the process. Then when they try to relight it later, it canoes, runs, or just tastes like charred disappointment.
The snuffer solves this in about 3 seconds. You tap the ash off using the round contact points on the surface — gentle enough that you're not compacting the remaining material — then slide the lit end into the conical hole. The tapered shape fits snugly around the tip of a standard cone or blunt, cutting off oxygen without physically crushing anything. The joint goes out cleanly. When you come back to it 20 minutes or 2 hours later, it relights evenly and smokes the way it should.
The honest limitation: this is a single-purpose tool. It doesn't double as a grinder, a poker, or a rolling surface. It does one thing. But it does that one thing better than your thumb, a wet fingertip, or the bottom of a coffee mug — all methods we've watched people attempt with mixed results. The magnet on the bottom is a nice touch, too. If you've got a metal ashtray or a RAW rolling tray, the snuffer clicks into place and stays there. No rolling off the table, no getting lost under the sofa cushions.
How to Use the Cone Snuffer
The full process takes under 10 seconds from lit joint to fully extinguished tip. Follow these five steps for the cleanest results.
- Place the snuffer on your metal rolling tray or ashtray — the bottom magnet will hold it in position. You'll feel it click into place. It's a satisfying little snap, about as strong as a fridge magnet (roughly 0.5 kg pull force).
- When you're ready to pause your session, hold the snuffer in one hand and your lit joint or blunt in the other. Gently tap the end of the cone against the round tap points on the surface. This knocks loose ash free without disturbing the packed material underneath.
- Once the excess ash is cleared, insert the lit tip of your joint into the conical centre hole. Push it in gently — the tapered shape will create a snug fit around the cherry. Hold it there for 3 to 5 seconds.
- Remove the joint. The cherry should be fully extinguished. If you see any glow, give it another few seconds in the hole. No need to twist or grind — just let the lack of oxygen do the work.
- Set your partially smoked joint aside. When you're ready to return to it, relight the tip as normal. Because you haven't crushed or deformed the end, it should draw evenly and burn straight.
Cone Snuffer vs. Other Methods
The snuffer outperforms every common DIY extinguishing method on shape preservation, relight quality, and cleanliness. We tested four approaches side by side using identical 1 1/4 RAW cones, each smoked to the halfway point — roughly 40 mm of remaining material — before extinguishing.
| Method | Preserves joint shape | Relight quality | Mess |
|---|---|---|---|
| Cone Snuffer | Yes — no crushing | Even burn, minimal canoeing | Ash stays on the tap points |
| Stubbing on ashtray | No — flattens and deforms the tip | Often canoes or runs on relight | Ash and paper debris everywhere |
| Pinching with fingers | Partially — compresses material | Tight draw, uneven burn | Resin on your fingers |
| Doob tube (cap method) | Yes, if careful | Decent, but stale taste from trapped smoke | Resin buildup inside the tube |
European Smoking Accessories Market: Context and Trends
Single-purpose smoking accessories like the cone snuffer sit within a broader European market that has grown steadily over the past decade. According to the European Monitoring Centre for Drugs and Drug Addiction (EMCDDA), an estimated 8 % of adults aged 15–64 in the EU reported cannabis use in the past year as of the 2023 European Drug Report, making accessories for responsible consumption increasingly relevant. The Beckley Foundation has published research noting that harm-reduction tools — including those that minimise material waste and reduce repeated lighter use — align with a broader trend toward more intentional consumption habits. In the Netherlands specifically, where Azarius is based, the coffeeshop model has long encouraged the use of quality accessories to improve the smoking experience. Google Maps listings for Amsterdam coffeeshops alone exceed 150, each one a potential point of sale for tools like this. The trend toward pre-rolled cones (RAW reports that cone sales grew approximately 30 % year-on-year between 2021 and 2023) makes a dedicated extinguisher more practical than ever, since cones are more fragile than hand-rolled joints and suffer more from aggressive stubbing.
Frequently Asked Questions
Does the cone snuffer work with king-size cones?
Yes. The conical centre hole is tapered, so it accommodates everything from slim 1 1/4 cones up to king-size and even most blunt wraps. The wider end of the taper handles the thicker gauge without any issue.
How do I clean the cone snuffer?
Wipe the tap points and the inside of the conical hole with a dry cloth or paper towel after each session to remove loose ash. For resin buildup, soak in isopropyl alcohol for 10 to 15 minutes, then rinse with warm water and dry completely before reuse.
Will the magnet scratch my rolling tray?
No. The magnet sits flush with the base and doesn't protrude. On a coated RAW metal tray, it attaches and detaches without leaving marks. On bare steel, you might see a faint circle over time, but nothing that affects function.
Can I use this as a joint holder or rest?
Not really — it's designed to extinguish, not to hold a lit joint hands-free. If you want a joint rest, RAW makes separate cone holders and trays with built-in rests. The snuffer is a single-purpose tool: snuff and save.
Does the cone snuffer put out the joint instantly?
Within 3 to 5 seconds for a standard joint. Thicker blunts with more material at the tip may take a couple of seconds longer. You're cutting off oxygen, so it's quick but not instantaneous — just hold it steady.
Is this better than just letting the joint go out on its own?
Letting a joint smoulder out wastes material — the cherry slowly eats through smokeable herb as it dies. The snuffer stops combustion immediately, so you save more for later. Even 5 to 10 seconds of uncontrolled smouldering costs you a puff or two.
Where can I order the cone snuffer?
You can order it right here at Azarius. We ship from the Netherlands and typically dispatch orders within 1 business day. It pairs well with any RAW rolling tray or ashtray already in your cart.
Last updated: April 2026
