CleanU ScreenUrin Set 2.0

CleanU ScreenUrin Set 2.0 — Synthetic Urine Kit

The CleanU ScreenUrin Set 2.0 is a complete synthetic urine kit that comes with everything you need to produce a body-temperature sample that passes standard screening panels. The thermal bag straps around your body, the heat packs bring the liquid to the right temperature, and the whole setup works for any anatomy — no separate "male" or "female" version needed.

What You Get in the ScreenUrin Set 2.0

The CleanU ScreenUrin Set 2.0 ships as a complete kit — nothing else to buy, nothing to mix. Here is exactly what is inside the box:

That spare empty bag is a nice touch. You can do a dry run at home — fill it with water, strap the whole setup on, and walk around for an hour. You will know exactly how it sits, how warm it feels, and where to position it before the real thing matters. We have seen people skip the practice and fumble with the straps under pressure. Do the rehearsal.

How the Colour-Coded Batches Work

Each sachet of CleanU synthetic urine carries one of three identification marks — green, yellow, or red. These colours indicate slightly different values for pH and creatinine, mimicking the natural fluctuations you would see in real human urine depending on diet and hydration. All three colours meet the same quality standard and are completely acceptable for use. You do not need to pick a specific colour; whichever one arrives in your kit is ready to go.

This is actually a clever detail. Real urine is not identical from person to person or even from morning to afternoon. By rotating between three value profiles, CleanU avoids producing a single "too perfect" formula that could raise flags for being suspiciously uniform. The variation makes each sample look more natural under analysis.

Specifications

Why This Kit Exists — And Why Temperature Is Everything

The single biggest reason synthetic urine samples get flagged is not the chemical composition — it is the temperature. A sample that arrives outside the 32–38°C acceptance window gets rejected before it even reaches the analyser. That is why the ScreenUrin Set 2.0 centres its entire design around thermal management. The strap-around bag holds the infusion pouch flat against your body, and the 2 included heat packs provide a chemical reaction that keeps the liquid within the right range for hours.

We have had customers ask whether they can just microwave a bag of synthetic urine and carry it in a pocket. You can try, but the temperature drops fast once it leaves the microwave, and a pocket does not provide consistent warmth. The thermal bag plus body heat plus heat pack combination is far more reliable. CleanU engineered this system specifically so you do not have to guess — the thermo-sachet does the work.

The other thing worth mentioning: the infusion bag is resealable. If you open it and then your appointment gets pushed back, you are not stuck with an exposed sample going stale. Seal it up, keep it warm, and carry on. No dripping, no leaking — the bag and syringe system is designed to be handled discreetly without leaving evidence on your clothes or hands.

Honest Limitations

One thing to be straight about: the ScreenUrin Set 2.0 is designed for standard conventional screening panels. If you are facing a more advanced analysis — one that specifically checks for biocides or synthetic markers — no off-the-shelf synthetic urine kit on the market is guaranteed to pass. The CleanU formula covers pH, creatinine, specific gravity, and colour, which handles the vast majority of standard tests. But "standard" is the operative word here.

Also, the kit includes 80ml of synthetic urine. Most standard collections require between 30ml and 45ml, so 80ml gives you a comfortable margin. But if you spill during the transfer or waste some during your practice run with the spare bag, you will not have litres to spare. Be deliberate with the syringe.

How to Use the CleanU ScreenUrin Set 2.0

1. Open the kit and familiarise yourself with all components: the pre-filled 80ml infusion bag, the empty spare bag, the strap-around thermal bag, the syringe, and the 2 heat packs.
2. Do a practice run first. Fill the empty spare bag with water using the syringe, place it in the thermal bag, and strap it around your body. Walk around for 30–60 minutes to get comfortable with the fit and positioning.
3. When you are ready for the real thing, activate one heat pack by exposing it to air (follow the instructions on the pack). Place it inside the thermal bag alongside the pre-filled 80ml synthetic urine infusion bag.
4. Strap the thermal bag against your body — the abdomen or inner thigh works well. Your body heat combined with the heat pack will bring the synthetic urine to 36–37°C within approximately 45–60 minutes.
5. Keep the setup strapped on until you need to produce the sample. The combination of body heat and heat pack maintains the operating temperature for several hours.
6. When the moment comes, use the syringe to transfer the synthetic urine from the infusion bag into the collection cup. The bag is resealable, so you can work carefully without rushing.
7. Dispose of the kit components discreetly. The second heat pack is your backup — activate it if your appointment runs longer than expected and you need to maintain temperature.