The Zamnesia Grow Tent Kit 60x60x180 is a complete plug-and-play indoor grow setup built around a 60×60×180 cm tent, a 120 W Phytonaut LED, and a full 100 mm extraction and filtration loop. It's the smallest proper kit Zamnesia builds — sized for 1–2 plants in a closet, spare corner, or studio flat where a 80×80 simply won't fit. Everything you need to flip the switch and start growing arrives in one box.
Why the Zamnesia Grow Tent Kit 60x60x180 fits where bigger kits don't
The Zamnesia Grow Tent Kit 60x60x180 is the answer when 80×80 is too big. A 60×60 footprint takes up roughly the floor space of a bedside table, and the 180 cm height stays under most ceiling lights and shelving. You're looking at one healthy plant trained properly, or two if you keep them small. That's it — and that's the whole point.
Honest about what this is: it's a small kit. The 120 W Phytonaut LED is matched to the canopy, not overkill, which means you won't be cooking your plants in a sealed 60×60 box. The 100 mm inline fan and carbon filter handle smell and air exchange properly — yes, grow tents smell, and without a carbon filter your neighbours will know. This kit ships with one, so that's sorted out of the gate.
What it isn't: a yield monster. If you want fat harvests or 3+ plants, scale up to the Zamnesia Grow Tent Kit 80x80x180 or the 100×100. We'd pick the 80×80 if you have the space — but if you don't, you don't, and this kit makes a 60×60 actually work.
What's in the box — every component, no upgrades needed
This is a complete starter kit, which means you're not shopping for extras on day one. The full inventory:
- Grow Tent 60×60×180 cm — lightproof fabric shell, steel frame, reflective interior
- Phytonaut LED 120 W — full-spectrum grow light matched to the 60×60 canopy
- Inline Duct Fan 100 mm — extraction for air exchange and heat management
- Carbon Filter 100 mm — odour control, paired to the inline fan
- Clip Fan 152 mm — internal air circulation, clips to the tent poles
- Grow Environment Controller — keeps fan and climate in check
- 24h Plug-In Timer — for the LED on/off cycle
- Flexible Ducting 2 m / 100 mm — connects fan, filter, and exit port
- Rope Ratchet Hangers — for the LED and filter
- Velcro Cable Loop Ties — for tidy wiring
Total power draw sits in the 100–199 W range with the LED, fans, and controller running. That's a normal wall socket — no special wiring, no breaker drama.
Specifications
| Tent dimensions | 60 × 60 × 180 cm |
| Plant capacity | 1–2 plants |
| Grow light | Phytonaut LED 120 W |
| Total power draw | 100–199 W |
| Inline fan | 100 mm |
| Carbon filter | 100 mm |
| Clip fan | 152 mm |
| Ducting | 2 m / 100 mm flexible |
| Climate control | Grow Environment Controller + 24h timer |
| Hardware | Rope ratchets, velcro cable ties |
How the Zamnesia Grow Tent Kit 60x60x180 compares to the bigger Zamnesia kits
The 60×60×180 is the entry into the Zamnesia kit range. Here's how it sits next to its siblings so you can pick by space, not by guesswork.
| Kit | Footprint | LED | Plants | Best for |
|---|---|---|---|---|
| Zamnesia Kit 60×60×180 | 0.36 m² | 120 W Phytonaut | 1–2 | Closets, tight spaces |
| Zamnesia Kit 80×80×180 | 0.64 m² | Higher wattage | 2–4 | Spare corner, balcony nook |
| Zamnesia Kit 100×100×200 | 1.0 m² | Higher wattage | 3–5 | Spare room, proper grows |
| Zamnesia Kit 120×120×200 | 1.44 m² | Higher wattage | 4–6 | Serious yields, dedicated room |
If you've got a spare metre square, take the 100×100 every time. If you've got a closet, this is the one.
How to set up the Zamnesia Grow Tent Kit 60x60x180
- Build the steel frame on the floor — poles slot together, no tools. Takes about 10 minutes for a 60×60.
- Pull the tent fabric over the frame, zip it closed, double-check the corners sit square.
- Hang the carbon filter inside the top of the tent using one rope ratchet. Filter goes first because it's the heaviest item.
- Attach the 100 mm inline fan to the filter, connect the 2 m flexible ducting from fan to the exhaust port. Cinch with the velcro ties.
- Hang the Phytonaut 120 W LED from the centre top bar with the second rope ratchet. Start at full height and lower as plants grow.
- Clip the 152 mm fan to a side pole, angled across the canopy — never directly at young plants.
- Plug the LED into the 24h timer. Plug the inline fan into the grow environment controller. Plug both into the wall.
- Run the tent empty for 24 hours to check temperature, humidity, and that no light leaks out of the zippers.
Pairs well with a feminized seed pack like Monkey Glue and a small fabric pot setup — the 60×60 footprint suits one 11–15 L pot or two 7 L pots comfortably. A simple soil mix and pH meter complete the day-one shopping list.
Why you need this kit instead of buying parts separately
Building a grow setup piece by piece is how people end up with a 150 mm fan trying to feed a 100 mm filter, or an LED that's too hot for the space. The Zamnesia Grow Tent Kit 60x60x180 is matched: the 100 mm fan fits the 100 mm filter fits the 100 mm ducting, and the 120 W Phytonaut LED is sized for the canopy. No mismatches, no returns.
The other reason: the carbon filter. We get asked weekly whether grow tents smell. They do. Without proper extraction through activated carbon, the smell escapes through every duct port and zipper. This kit includes a 100 mm carbon filter paired to a matched inline fan — odour handled from day one. According to grow-tent guidance published on industry blogs, controlling humidity and air exchange is one of the main reasons tents outperform open-room grows (Directly2U, 2023).
Frequently Asked Questions
How many plants fit in the Zamnesia Grow Tent Kit 60x60x180?
One to two plants, depending on training. One plant in an 11–15 L pot trained with low-stress techniques will fill the canopy comfortably. Two smaller plants in 7 L pots also work if you keep them tidy.
Is the 120 W Phytonaut LED enough light for a 60×60 tent?
Yes — the LED is matched to the 60×60 footprint specifically. Bigger wattage in a small tent creates heat problems and burns the canopy. 120 W is the right number here, not a compromise.
Will the carbon filter handle the smell?
Yes, when the inline fan is running. The 100 mm activated carbon filter scrubs air on the way out of the tent. Replace the filter every 12–18 months depending on use — that's when carbon saturates and smell starts breaking through.
How much power does the full kit draw?
Total power sits in the 100–199 W range with the LED, inline fan, clip fan, and controller running. That's a standard wall socket — no special wiring needed.
Can I grow taller plants in the 180 cm height?
180 cm is generous for a 60×60 but the LED, ducting, and pot all eat into that height. Realistic plant height is around 100–120 cm. Pick shorter indica-leaning genetics or train aggressively if you want sativa traits.
What's not included that I'll still need?
Pots, soil or coco substrate, seeds or clones, nutrients, and a pH meter. The kit covers the environment — you bring the plants and the growing medium.
Last updated: April 2026
