The Zamnesia Grow Tent Kit 100x100x200 is a complete intermediate growing setup that gives you a 100×100×200 cm tent, a Phytonaut 320 W LED, a 150 mm inline fan with matching 150 mm carbon filter, plus a clip fan, controller and timer — everything wired up for 2–5 plants in one square metre. This is the kit we'd point you at when you've outgrown an 80×80 but don't want to commit to a 120×120 monster. SCROG-friendly footprint, upgraded 150 mm ventilation, and Zamnesia's own-brand kit pricing.
Why this Zamnesia Grow Tent Kit 100x100x200 sits in the sweet spot
One square metre is the size most home growers should be aiming for. The Zamnesia Grow Tent Kit 100x100x200 gives you enough canopy to run 4 plants in standard pots, 2–3 in fabric pots with serious training, or a proper SCROG net wall-to-wall. The 200 cm height is the part people overlook — once you subtract 30 cm for the LED, ducting and clearance, you've still got 165 cm of vertical room for plants to stretch. An 180 cm tent leaves you fighting the ceiling by week three of flower.
The upgrade that matters here is the ventilation. Most entry kits ship with a 125 mm inline fan and filter. This one steps up to 150 mm on both the inline duct fan and the carbon filter, which means more airflow, less noise at the same extraction rate, and a filter that lasts longer before it saturates. Pair that with the 152 mm clip fan for canopy movement and you've got the airflow setup most growers piece together after their first failed run.
What's in the box — the full Zamnesia Grow Tent Kit 100x100x200 unboxing
Ten items, no missing pieces, no "you'll also need to buy" surprises. Here's the lot:
- Grow Tent 100×100×200 cm — reflective interior, steel frame, double-stitched zippers
- Phytonaut LED 320 W — full-spectrum, dimmable, covers the 1 m² footprint
- Inline Duct Fan 150 mm — extraction with headroom for a carbon filter
- Carbon Filter 150 mm — keeps the smell in the tent, not in the hallway
- Grow Environment Controller — manages fan speed based on temp/humidity
- Clip Fan 152 mm — canopy circulation, stronger stems, fewer mould pockets
- Flexible Ducting 2 m / 150 mm — enough run for most setups
- 24h Plug-In Timer — for the LED light cycle
- Rope Ratchet Hangers — adjust the LED height as plants grow
- Velcro Cable Loop Ties — for tidy wiring inside the tent
Specifications for the Zamnesia Grow Tent Kit 100x100x200
| Tent dimensions | 100 × 100 × 200 cm |
| Footprint | 1 m² |
| Plant capacity | 2–5 plants |
| LED model | Phytonaut 320 W full-spectrum |
| Total power draw | 300–399 W |
| Inline fan | 150 mm |
| Carbon filter | 150 mm |
| Clip fan | 152 mm |
| Ducting | 2 m / 150 mm flexible |
| Climate control | Grow Environment Controller + 24h timer |
| Training method | SCROG-ready |
| Brand | Zamnesia own-brand |
How the Zamnesia Grow Tent Kit 100x100x200 compares to other Zamnesia kits
If you're cross-shopping the Zamnesia kit range, here's the honest breakdown:
| Kit | Footprint | LED | Inline fan | Best for |
|---|---|---|---|---|
| Zamnesia 60×60×180 | 0.36 m² | Lower-wattage LED | 125 mm | 1–2 plants, tight spaces |
| Zamnesia 80×80×180 | 0.64 m² | Mid-wattage LED | 125 mm | 2–3 plants, first-time growers |
| Zamnesia 100×100×200 | 1 m² | Phytonaut 320 W | 150 mm | 2–5 plants, SCROG |
| Zamnesia 120×120×200 | 1.44 m² | Higher-wattage LED | 150 mm+ | 4–6 plants, serious yield |
The 100×100×200 is where the kit gets upgraded ventilation — that's the genuine step up from the 80×80. If you want the 1 m² canopy without the 1.44 m² footprint of the 120×120 eating half your spare room, this is the one.
How to set up the Zamnesia Grow Tent Kit 100x100x200
- Assemble the steel frame on the floor — it slots together in about 15 minutes, no tools needed.
- Pull the tent fabric over the frame, zip up the door, and check all light leaks with the lights off.
- Hang the 150 mm carbon filter from the top bars using the rope ratchet hangers, with the inline duct fan attached via the 150 mm flexible ducting.
- Mount the Phytonaut 320 W LED on the second pair of rope ratchets — start it about 50–60 cm above the canopy and adjust as plants grow.
- Clip the 152 mm clip fan to a corner pole, angled across the canopy (not directly at it).
- Plug the LED into the 24h timer, set your light cycle (18/6 for veg, 12/12 for flower).
- Wire the inline fan into the Grow Environment Controller and set your target temp/humidity.
- Tidy all cables with the Velcro loop ties before you bring plants in — once it's running, you don't want to be reaching past leaves.
Complete your setup: pair this with feminized seeds suited to a SCROG run (Monkey Glue is a solid pick for the 1 m² footprint — short, branchy, responds well to training), and grab a pH meter plus EC pen if you're running hydro or coco. A bag of Mills or BioTabs nutrients will see you through your first full cycle.
Frequently Asked Questions
Is the Zamnesia Grow Tent Kit 100x100x200 good for beginners?
It's an intermediate kit, not a beginner one. The 1 m² footprint and 320 W LED are more than a first-time grower needs, but the controller and timer make it easier than running individual components. If this is your first grow, fine — just don't fill it with five plants on day one.
How many plants can I actually fit in a 100×100×200 tent?
Two to five, depending on method. Two to three plants in 15 L pots for SCROG gives the best yield per plant. Four to five in smaller pots works for SOG (sea of green) with minimal training. The spec sheet says 2–5; we'd say 3 is the sweet spot.
Will the 150 mm carbon filter keep the smell down?
Yes, when it's running. The 150 mm inline fan pulls air through the carbon filter and exhausts neutralised air. Run it 24/7 during flower — that's when the smell peaks. The filter lasts roughly 12–18 months of continuous use before it needs replacing.
What does the Grow Environment Controller actually do?
It regulates the inline fan speed based on temperature and humidity inside the tent. Set your target (say 24 °C, 55% RH) and the controller ramps the fan up or down to hold it. Saves you babysitting the tent in summer.
Can I run the Phytonaut 320 W LED at full power from seedling?
No. Dim it to around 30–40% for seedlings and clones, raise it gradually as plants mature. Full power is for late veg and flower. The rope ratchets let you adjust height instead of (or alongside) power — bigger plants want the light closer.
How does this kit compare to the Zamnesia 120x120x200 kit?
The 120×120 gives you 44% more canopy area and usually a stronger LED, but it also needs a bigger room and pulls more power. The 100×100×200 is the right pick if you've got a spare cupboard or half a spare room — the 120×120 wants a dedicated grow space.
Last updated: April 2026
